Tercel4WD.com

the old (79-83) corolla wagons were leaf spring rear, so theres already a rear axle set up for it that will fit.

I was just looking at one in the junkyard today, and I am pretty sure they are coil spring in the rear, although I could be wrong(I might be thinking of the datsun rear ends).

just ...

the old (79-83) corolla wagons were leaf spring rear, so theres already a rear axle set up for it that will fit.

79-83 corolla sedan and coupe rear axles should work too, considering they were actually in the parts bin when the tercel was designed. corolla wagons are leaf spring so it would take some new brackets for those.

ive been a member of mr2oc for a few years now, but its been a while since ive visited.

your're the first person other than me that i've heard refer to a mr2 as "mr. deuce" id get that as my license plate if we were'nt limited to 6 letters

basically the way a pressure regulator works is by making the fuel line smaller here is a good source for weber info http://www.racetep.com/webtechpage.html

i will note that my dad has used webers for years with the factory toyota fuel pumps with out any problems. on models ranging from starlets ...

keep the mr2s alive! ive got an 85 at my dads house on the coast (waldport) awaiting a new engine. key to driving an mr2 is just to know your limit and dont drive over your head

actually, the carter pump noted above without a regulator is the recommended pump for webers. filling the float bowl at a slower rate isnt gonna use any less fuel either, because the rate of fuel consumption is based on vacuum pull through the carb.

A pressure regulator will also cut volume, which is what a weber really needs. Also, mechanical fuel pumps pulsate when they pumpand webers work best with constant pressure.

hey im looking for a couple of the rear interior covers in the tan/caramel color

left rear top (turn signal)
the jack compartment cover
and the back up light cover

and if youve got one, the cargo cover for an 86+

I've seen a headlight buzzer at walmart before, it just plugged into the fuse box I think, might have to see if they still carry them, I have the same problem.

im looking for all of the rear covers.
all 5 light covers and the big side covers.
let me know how much you want, zipty842@yahoo.com

Does anybody know if there are any major differences between the 81-82 and the 83-88 heads? I just bought a head gasket set and noticed that not only does it say 81-82 on the box, but there are actually two different part numbers for the head gasket.

yes it does

Nope, the A series are non-interference motors, it will just stop running.