Tercel4WD.com

I'm told you were able to get her started right up. what did I miss?

Gone! Gonna miss my little "Pat" the energizer bunny

Located in halifax, ns. I have been working away the last 2 yrs and haven't been able to use it. It would start right up whenever i came home "much to my wifes displeasure". Last trip home, the starter wouldn't turn over, figured it was the battery, but maybe the starter. But with only 7 days every ...

Wish I had the dough

http://cgi.ebay.com/ebaymotors/Mini-4x4 ... 43a5992adb

it is from the transverse trans, but the cars also used the 4A engine

wondering if if would physically fit the bell housings?

Bunny

As in Energizer bunny, it just keeps going and going and going, well yu know what i'm talking about

Was told by a mechanic, that a regular 5 speed would fit and that just changing out some pieces in the rear would allow 4wd, minus extra low. truth or fiction

Has anybody attempted to adapt the Bosch CIS from the VW rabbit to a T4? no electrics other than the pump, should be easy.

Trying to get my heater fan running. the relay works, so next is to check the fusible link, is this in the drivers kick panel or the fan itself? if so do I have to take off the whole lower console or is there some other trick?

Roger, front halfshaft replaced. was doing the rear bearings, word to wise the rockauto shows timken 5 this is not the case, pita. Chris was very good about this, and is sending the required parts, and changing the website to reflect it.

what tool can be used for halfshaft pulling, I have #sst 09648-16010, is there an equivalent

How about a cheaper part # for the fan thermostat relay. is there an equivalent part to be had for less

Changed the oil today and found the outboards leaking. Looking for boots and or complete axle assy's. In NS so maritimes, and Maine will work. Thanks to all

Looking at rock auto as we speak

did the 4th phot from the bottom have one black front fender on it if so it is my old girl. I dropped my phone in the wash, and donèt have paulès # anymore could you post or pm