4A-C for 83' tercel 4WD WANTED

Need a car part and don't know where to get it or how to install it. Look here!
Post Reply
DuB.wEasEl
Member
Posts: 40
Joined: Mon Jul 02, 2012 4:20 pm
My tercel:: 83 4wd Sr5
Location: Sequim, WA

4A-C for 83' tercel 4WD WANTED

Post by DuB.wEasEl »

I am trying to find a 4A-C ready to be rebuilt in the Seattle area.
83 Tercel SR5
81 Isuzu I-mark, Diesel (42mpg on used motor oil, tranny fluid, fry oil, way oil...)
User avatar
Petros
Highest Ranking Member
Posts: 11941
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: 4A-C for 83' tercel 4WD WANTED

Post by Petros »

The Lynnwood WA Pick-n-pull shows three corollas of the correct year. None at the Arlington Pick-n-pull.

I have a friend with a 4ac sitting in his garage that he intends to rebuild, the bearings on it are trashed, and it will likely need pistons and rings, etc. we found a good running 3ac to put in his tercel, which is not in it and drivable, and he intended to rebuilt the 4ac and do a swap. But he has been working so much overtime that he has little time to mess with the engine. I will ask if he wants to sell it, it is located here in Arlington.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
Post Reply