List of what I know this far is missing. I wish for them to have pigtails so I can splice them in.
Coolant temperature sensor connector (harness-side)
Car-side stereo harness
More to come, I will post additional comments as I fine missing connectors.
Looking for some electrical connectors
- lannvouivre
- Top Notch Member
- Posts: 387
- Joined: Fri Apr 17, 2015 7:18 pm
- My tercel:: 2006 Pontiac Vibe
- Location: Odessa, TX
Looking for some electrical connectors
But...did you try hitting it with a hammer?
- irowiki
- Highest Ranking Member
- Posts: 3469
- Joined: Tue Apr 02, 2013 10:02 am
- Location: Farmington, NM
Re: Looking for some electrical connectors
Amazon/ebay has the car stereo harness but it may be the 87 up one (smaller pins) I can find you the part number tomorrow.
Former Tercel Enthusiast (not a practical family car anymore but they still have a place in my heart)
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 197k
05 Avalon, 199k
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 197k
05 Avalon, 199k
- lannvouivre
- Top Notch Member
- Posts: 387
- Joined: Fri Apr 17, 2015 7:18 pm
- My tercel:: 2006 Pontiac Vibe
- Location: Odessa, TX
Re: Looking for some electrical connectors
As long as the pinouts match, it's no concern. We just need a proper setup to splice in.
But...did you try hitting it with a hammer?
- irowiki
- Highest Ranking Member
- Posts: 3469
- Joined: Tue Apr 02, 2013 10:02 am
- Location: Farmington, NM
Re: Looking for some electrical connectors
http://www.ebay.com/itm/TOYOTA-OEM-STOC ... ~U&vxp=mtr
This is what you want, if you price search around you might find it cheaper.
This is what you want, if you price search around you might find it cheaper.
Former Tercel Enthusiast (not a practical family car anymore but they still have a place in my heart)
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 197k
05 Avalon, 199k
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 197k
05 Avalon, 199k
- lannvouivre
- Top Notch Member
- Posts: 387
- Joined: Fri Apr 17, 2015 7:18 pm
- My tercel:: 2006 Pontiac Vibe
- Location: Odessa, TX
Re: Looking for some electrical connectors
I still need each of the coolant sender connectors. That's the fat round green one to the top of the thermostat housing, and the smaller rectangular "natural" (off-white) one on the head by the cam sprocket. Please help me out here!
But...did you try hitting it with a hammer?
- Petros
- Highest Ranking Member
- Posts: 11941
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: Looking for some electrical connectors
if you are installing a weber you will not need the one at the coolant outlet, it is for the emissions control ECM. The one next to the cam sprocket at the front of the head is for the temperature gauge on the dash.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
- lannvouivre
- Top Notch Member
- Posts: 387
- Joined: Fri Apr 17, 2015 7:18 pm
- My tercel:: 2006 Pontiac Vibe
- Location: Odessa, TX
Re: Looking for some electrical connectors
Ah. I still need one or a connector that will fit that one, then. I don't want it to look all hackjob!
But...did you try hitting it with a hammer?
- Petros
- Highest Ranking Member
- Posts: 11941
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: Looking for some electrical connectors
the actual wire connector within the plug is a standard bayonet type contact housed in a plastic "plug" housing. I have used standard connectors if I did not have the Toyota connector, it works fine, just clearly not stock looking. if you shop in most auto parts stores you can find connectors with colored plastic covers on them, use one of those and no one except a Tercelernaught will know it is not "factory". Your engine bay is clearly not "factory" anyway.
Otherwise you will have to find similar connectors in a wrecking yard (all models from the same model year have similiar looking connectors), and splice the line is the only way to get the stock "look". I doubt anyone is still making the same type of connector assemblies 30 years after this car went out of production.
Otherwise you will have to find similar connectors in a wrecking yard (all models from the same model year have similiar looking connectors), and splice the line is the only way to get the stock "look". I doubt anyone is still making the same type of connector assemblies 30 years after this car went out of production.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
- lannvouivre
- Top Notch Member
- Posts: 387
- Joined: Fri Apr 17, 2015 7:18 pm
- My tercel:: 2006 Pontiac Vibe
- Location: Odessa, TX
Re: Looking for some electrical connectors
Oh, good. None of the local yards will have what exactly I need ('98 and newer only), but that'll make it easier to find a replacement.
But...did you try hitting it with a hammer?