suspension lift
suspension lift
im looking to do a Barto suspension swap. Swap out rear springs with 90 Pathfinder Springs. Then Swap front Struts with 86 Camry (spring,and top hat). Do i have to use shims , or lower drive line or can i just do a Swap and be done ? Thanks
-
dlb
- Highest Ranking Member
- Posts: 7447
- Joined: Mon Jul 06, 2009 9:03 pm
- My tercel:: '87 sr5, '83 dlx parts car
- Location: bc, canada
Re: suspension lift
welcome to the forum, 84terc. i think you can find the info you seek in the FAQ. see question #10. here is the link.
https://tercel4wd.com/forums/viewtopic.php?f=2&t=7442
https://tercel4wd.com/forums/viewtopic.php?f=2&t=7442
-
Petros
- Highest Ranking Member
- Posts: 11941
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: suspension lift
do not do the camry springs route, you will damage your cv axles and blow out the top seals on the struts. go read the various threads on this forum about lift and you will find much information.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)