looking for new Tercel door handles that will fit a 88 tercel sr5 wagon, I'll also consider minty used door handles that have no rust and move well.
cheers
scott
WTB: Door handles
-
- Top Notch Member
- Posts: 289
- Joined: Sun Aug 29, 2010 9:59 am
- My tercel:: 1988 SR5 Wagon
- Location: Vancouver Island
WTB: Door handles
2JZGTE-powered Tercel SR5
Re: WTB: Door handles
Interior or exterior ? I probably have good used exterior one's i'll have to go check my parts stash.
2001 Subaru Forester 2.5
-
- Top Notch Member
- Posts: 289
- Joined: Sun Aug 29, 2010 9:59 am
- My tercel:: 1988 SR5 Wagon
- Location: Vancouver Island
Re: WTB: Door handles
hey man, I am looking for exteriors so far - some of mine are stuck in the "up" position and are soo rusty
2JZGTE-powered Tercel SR5
- Petros
- Highest Ranking Member
- Posts: 11941
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: WTB: Door handles
I have a set I think from an '87 in good condition. How many do you need? There are several T4wd in the local yard.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
-
- Top Notch Member
- Posts: 289
- Joined: Sun Aug 29, 2010 9:59 am
- My tercel:: 1988 SR5 Wagon
- Location: Vancouver Island
Re: WTB: Door handles
I just got my drivers side exterior replaced, it's working really smoothly.. I'm going to try and re-lube the rear driver side door to see if I can get it from sticking, all the other door handles work well so far.
thanks for the replies btw, it's a good feeling ppl are there to help!
thanks for the replies btw, it's a good feeling ppl are there to help!

2JZGTE-powered Tercel SR5
Re: WTB: Door handles
Has anyone found a way to fix these? My pass side requires a lot of work to get it open...now the drivers side is getting trickier.
So what is the issue besides rust? Does the plastic deteriorate and cause the binding?
So what is the issue besides rust? Does the plastic deteriorate and cause the binding?
Give a boy a gun-give a biatch a cell phone-and pretty soon you almost got yourself a police state.
Orwell said: War is peace! Freedom is slavery. Ignorance is strength...

Orwell said: War is peace! Freedom is slavery. Ignorance is strength...

-
- Highest Ranking Member
- Posts: 677
- Joined: Sat Mar 07, 2009 9:00 am
- My tercel:: 83 4WD with some SR5 equip
- Location: SURREY,B.C. Canada
Re: WTB: Door handles
takza wrote:Has anyone found a way to fix these? My pass side requires a lot of work to get it open...now the drivers side is getting trickier.
So what is the issue besides rust? Does the plastic deteriorate and cause the binding?
I had many handles from the past that has same problem , it some kind of CORRISION built up from friction of metal to metal sametime water runs down from window, maintance by lube it or WD40 will work but for short time ,dirt or dust goes in the handle then more problem later , my opion it must stay dry ( no lube).
then steel stud in plastic housing break, I collect lots of right/left exteriors door handles ,what ever I find them in auto wrecking yard I collect them to store them as back up parts .