finished at last

shogun · Post by **shogun** » Wed Mar 29, 2006 6:01 pm

well im done, i cant feel my hands from the die grinder, but im done, the manifold was only port matched and then smoothed, pics are before the smoothing of the ports and mani

T-Bone · Post by **T-Bone** » Wed Mar 29, 2006 10:03 pm

nice pics, is that the 3AC head or 4AC?

Typrus · Post by **Typrus** » Thu Mar 30, 2006 12:40 am

Wacky intake.....
Lookas lik how I'm doing it lol.
How'd you keep the aluminum from loading into the grinder?

shogun · Post by **shogun** » Thu Mar 30, 2006 8:14 am

its a 3asu head, and the manifold is froma 3ascv, and use kerosene so aluminum wont get stuk, it helps a lot

GTSSportCoupe · Post by **GTSSportCoupe** » Thu Mar 30, 2006 9:12 am

Sweet! Can't wait to hear about how it runs!

shogun · Post by **shogun** » Thu Mar 30, 2006 1:23 pm

me either, im going on two stages, one with the webber and the manifold you see there, and the next one (onace tha championship is over ) with the two carb manifold and a couple of kadron carbs or something like them, hopefully a cam and valvetrain, i need to rev up to 8000 rpms