Search found 1325 matches

by NWMO
Sun Oct 02, 2022 7:28 pm
Forum: Tercel 4WD Repair Questions
Topic: stock radio removal?
Replies: 4
Views: 56

Re: stock radio removal?

Remove the surrounding panel and it’s very clear/easy to remove.

Chris
by NWMO
Tue Sep 27, 2022 6:41 am
Forum: Tercel Gallery and Projects
Topic: Much better
Replies: 4
Views: 84

Re: Much better

Keep up the hood work, these are fun little cars! And functional!

Chris
by NWMO
Mon Sep 26, 2022 5:56 am
Forum: Tercel Gallery and Projects
Topic: Turbo 4age tercel
Replies: 5
Views: 96

Re: Turbo 4age tercel

Nice work Keegan, What purpose is the stock radiator going to serve? I see you’re working around it, but understand the large AL radiator will cool the engine? Piping/hoses will be interesting. Do you expect this set up to have some of the same “heat” challenges (exhaust heat melting wires, etc.) as...
by NWMO
Sun Sep 25, 2022 8:58 pm
Forum: Off-Topic
Topic: Great story!
Replies: 1
Views: 96

Great story!

Patagonia

Quite a story! It seems Matt or Peter (I think it was Matt), shared pics with the owner. Hopefully there is a domino effect and a real difference can be made.

Chris
by NWMO
Sat Sep 24, 2022 5:44 am
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 1644

Re: Clutch Chatter/Vibration

Make sure you have gone through the clutch adjustment properly.

Chris
by NWMO
Sat Sep 24, 2022 5:40 am
Forum: Tercel 4WD Parts: New and Used
Topic: parting out 1983 sr5 wagon
Replies: 7
Views: 234

Re: parting out 1983 sr5 wagon

rr,

Where in Iowa? I’m in NW Missouri.

Chris
by NWMO
Wed Sep 21, 2022 7:39 pm
Forum: Tercel Gallery and Projects
Topic: after many years, I'm finally back in the T4 game
Replies: 28
Views: 920

Re: after many years, I'm finally back in the T4 game

It’s more fun to wrench on a car that was designed to be repaired by “shade tree” mechanics.

Chris
by NWMO
Wed Sep 21, 2022 7:36 pm
Forum: Tercel 4WD Repair Questions
Topic: clutch installation questions
Replies: 8
Views: 120

Re: clutch installation questions

Pilot bearing should be fine. Clutch disc in? correct side out (in the FSM)? did you use an alinement tool?

When you install the PP, there is resistance due to the PP force on the clutch plate as well. That may be part of what you were noticing.

Chris
by NWMO
Mon Sep 19, 2022 8:26 pm
Forum: Tercel 4WD Repair Questions
Topic: clutch installation questions
Replies: 8
Views: 120

Re: clutch installation questions

I believe flush with the flywheel center should be fine.
by NWMO
Mon Sep 12, 2022 4:36 pm
Forum: General
Topic: Do I need to be able to remove all filler plugs?
Replies: 5
Views: 185

Re: Do I need to be able to remove all filler plugs?

I typically try to follow the FSM and it recommends filling from the back passenger side plug (a pain to access). I don’t know that it makes a big difference, BUT, you should back out the bolt on the bottom 7-8 turns as directed to drain/fill the rearmost compartment in the transmission. The oil doe...
by NWMO
Mon Sep 12, 2022 3:49 pm
Forum: Repair Guides
Topic: Clutch Chatter/Vibration
Replies: 41
Views: 1644

Re: Clutch Chatter/Vibration

Great to hear! The idle can be pretty finnicky, but not a huge deal most times.
by NWMO
Fri Sep 09, 2022 12:35 am
Forum: Tercel 4WD Repair Questions
Topic: 1985 Toyota Tercel 4WD SR5 6-spd seals?
Replies: 11
Views: 358

Re: 1985 Toyota Tercel 4WD SR5 6-spd seals?

Yes, the 4WD shifter seal isn’t bad. Now, I have fought getting the cast iron linkage off. Check the FSM, some good info. Good luck!
by NWMO
Tue Sep 06, 2022 1:42 pm
Forum: Tercel 4WD Repair Questions
Topic: Engine swap
Replies: 4
Views: 96

Re: Engine swap

Good golly, over a decade between posts?,

Are you still in AK? Let us know, as that will make a difference. I believe there is one available in MI right now, otherwise salvage yards are your friend. Why not rebuild your current engine?
by NWMO
Sat Sep 03, 2022 9:37 pm
Forum: Tercel Gallery and Projects
Topic: after many years, I'm finally back in the T4 game
Replies: 28
Views: 920

Re: after many years, I'm finally back in the T4 game

The only thing possibly damaged would be the pilot bearing, which is getting replaced anyhow. Should work fine.