Shifter bushings

How-to's and repair secrets for your 4WD can be found here. Have a question? Ask it in here!
Post Reply
Bassman
Newbie
Posts: 1
Joined: Mon Jan 12, 2015 10:20 am

Post by Bassman »

Hello all,
I did a search and turned up nothing. If this is covered ground please point me in the right direction.
I recently puchased a '83 tercel wagon (4wd) for my son and the only real issue with the car is the shifter. It's beyond sloppy. How hard is it to replace the shifter bushings? Do you have to get them from toyota, or can you get them aftermarket?

Thanks in advance, Tim
Top
shogun
Highest Ranking Member
Posts: 784
Joined: Thu Mar 31, 2005 1:48 pm

Post by shogun »

its a cylindrical one, with some nylon and a lathe you can do it in about 15 minutes
tercel 4wd custom suspension, under drive pulley, vented brakes, cold air intake, and plenty more to come
Top
3A-C Power
Highest Ranking Member
Posts: 849
Joined: Thu Apr 01, 2004 5:22 pm
Location: Ontario, Canada

Post by 3A-C Power »

How do you cut the round part on the inside with a manual lathe?
Top
shogun
Highest Ranking Member
Posts: 784
Joined: Thu Mar 31, 2005 1:48 pm

Post by shogun »

well i cut a square part so where there is no contact there is a littlle grease
tercel 4wd custom suspension, under drive pulley, vented brakes, cold air intake, and plenty more to come
Top
Post Reply

Return to “Tercel 4WD Repair Questions”