Hey all,
I have an '84 SR5 and I just painted and reinstalled my front windshield moulding. The clips were gone when I took it apart from someone doing a front windshield, so I put the moulding back with a gooey adhesive so that I could get it back off when I paint the car later in the year. Tonight the upper driver's corner came loose while driving and I lost the corner piece that connects to top with the drivers side moulding. Would anyone have just the small upper corner piece for the driver's side? I don't care if it is peeling and in bad shape, as long as the metal is good and the corner is solid, I can refinish it. Please let me know
1984 SR5 front windshield moulding
-
- Advanced Member
- Posts: 97
- Joined: Wed Sep 24, 2014 8:52 pm
- My tercel:: 1984 sr5 4wd
- Location: richmond, virginia
1984 SR5 front windshield moulding
You do not have the required permissions to view the files attached to this post.
- Gottolovem
- Highest Ranking Member
- Posts: 1637
- Joined: Fri Jun 29, 2012 4:28 pm
- My tercel:: 1985 SR5 with snow plow,1987 auto 1984 parts car,1987 FX-16 GTS
- Location: Reno
Re: 1984 SR5 front windshield moulding
I'll take a look
-
- Advanced Member
- Posts: 97
- Joined: Wed Sep 24, 2014 8:52 pm
- My tercel:: 1984 sr5 4wd
- Location: richmond, virginia
Re: 1984 SR5 front windshield moulding
Thank you...I appreciate it. I had just redone all of it, blasted it and repainted it and I should have installed it with a different adhesive. I didn't think it would some off at such a low speed though, I was only doing about 40mph at the time. I am still kicking myself in the rear because now I lost something you just cannot easily find. If anyone has this piece, please let me know
Cheers!!

-
- Highest Ranking Member
- Posts: 515
- Joined: Thu Dec 08, 2011 6:33 pm
- My tercel:: 1985 4wd 1986fwd 1983 4wd
Re: 1984 SR5 front windshield moulding
i have a couple extra ones if you cant find one close to home i can mail you one,
-
- Advanced Member
- Posts: 97
- Joined: Wed Sep 24, 2014 8:52 pm
- My tercel:: 1984 sr5 4wd
- Location: richmond, virginia
Re: 1984 SR5 front windshield moulding
Hey Jim....that would be great. I have not been able to find any of these cars in local scrap yards and I have called several places and no luck yet. If you have an upper Driver's corner, that would be GREAT. Where are you located? I am in Richmond, Va, zip 23060. What would you want for it price-wise? Feel free to PM me too. I have no concerns purchasing one from you and having you mail it to me, I would be most grateful and will take all the steps to ensure this does not happen again.
Look forward to hearing back from you.

-
- Highest Ranking Member
- Posts: 515
- Joined: Thu Dec 08, 2011 6:33 pm
- My tercel:: 1985 4wd 1986fwd 1983 4wd
Re: 1984 SR5 front windshield moulding
ihave a couple at home will check to make sure they are the drivers side tonite, if i make it home lol going to get 50cms of snow today starting in a couple of hours. i am in nova scotia canada, price wise its a free-b
-
- Advanced Member
- Posts: 97
- Joined: Wed Sep 24, 2014 8:52 pm
- My tercel:: 1984 sr5 4wd
- Location: richmond, virginia
Re: 1984 SR5 front windshield moulding
Wow, travel safely....will you be traveling in your Tercel?
I am down in Virginia, please let me know and I will give you all of my information.
I have no problem compensating you for it or for at least the mail cost....just let me know how you want to handle it. Look forward to hearing from you.
Chris


Chris