Cheapest way to get a 2" lift? Anyone

General discussion about our beloved Tercel 4WD cars
Post Reply
lilcurt503
Newbie
Posts: 2
Joined: Fri Mar 21, 2014 6:12 pm
My tercel:: 1986 tercel SR5

Cheapest way to get a 2" lift? Anyone

Post by lilcurt503 »

Hey guys new to this what's the cheapest way to get a 2 in lift on my tercel sr5. And my friend and I were thinking of putting razor tires on. Is it safe? Thanks
User avatar
Petros
Highest Ranking Member
Posts: 11941
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: Cheapest way to get a 2" lift? Anyone

Post by Petros »

welcome to the forum,

two easy way to lift the rear: get air shocks for an adustable ride, or Nissan Pathfinder rear springs with firbird (longer) rear shocks.

front eaisest way is to shim down the top of the strut mount. I would not recommend 2" in front, you will damage your cv axles at that angle and damage the upper seal on the strut (so it will cost you a lot in repairs). keep it at about 1" or 1.5" max, and than get a taller wheel and tire, but you might have to clearance out the fender and fender well.

Go read the FAQ section, there are links to threads on this topic.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
User avatar
dlb
Highest Ranking Member
Posts: 7446
Joined: Mon Jul 06, 2009 9:03 pm
My tercel:: '87 sr5, '83 dlx parts car
Location: bc, canada

Re: Cheapest way to get a 2" lift? Anyone

Post by dlb »

Post Reply