picks of lift, bumper, lights

[splatterdog]

Not running pcv? The egr valve location makes a great vacuum source for the valve. On my two I just whipped up a simple flange of 1/2 inch aluminum bar then tapped in a brass hose nipple to go in the egr valves place.

[splatterdog]

Sorry, not trying to rip your car here(looks good btw). But your fuel pressure reg really needs to be moved. My first one like that ruptured and dumped 3/4 tank in a hurry on the wife one day before she noticed. Mine was zip tied to the brake booster hose and didn't gush on anything really hot. I moved the carb inlet to the other side and the reg to the fender after that incident.

Without the intake heat shield, yours would dump all over the exhaust manifold. Lots of extra heat on the reg too.

I don't want to see any pics of a toasted terc!

[ESI-RStarion]

I was curious what tires you were using, 83toybeater. Let me know, thanks.

[83toybeater]

195/75/14 winterforce
http://www.tirerack.com/tires/tires.jsp ... mpare1=yes
couldnt ever been happyer with the tires, cheap, and gripp was amazing in snow and mud and dirt.

but i see bfg AT is now in that size but 3 times as much.

[terceldude]

someone should take the body of that flipped over one and make it into an actual complete car again and put it on a '90-'95 4Runner frame, haahahahahahahaha!

[SynthDesign]

83toybeater,
Great bumper and vehicle set-up. I like your "real Man" tow hooks. Very well done.

[walkersimpson]

thanks for all the information guys i was looking at your bumper and wondering where i might find one like that and how hard it was to put on thanks