side trim

Aldavr6 · Post by **Aldavr6** » Tue Nov 08, 2005 5:43 pm

Hi. Anybody have any idea how to glue the side rubber trim on the door back? It's coming out in one side, the one close to the back door. Any idea will be great!!

takza · Post by **takza** » Wed Nov 09, 2005 5:49 am

You should post this in the Questions area.

I've used silicone caulk and duct tape. Clean up the back of the trim if you can and the car body...i use laquer thinner.

Get some silicone on the back of the trim and glue it down. Use duct tape or a stick set against something solid to hold the trim snug...give it a few hours or overnight to cure. Clean up the excess goop.