New Clutch

How-to's and repair secrets for your 4WD can be found here. Have a question? Ask it in here!
Post Reply
Aussie_3ASCV
Advanced Member
Posts: 80
Joined: Tue May 24, 2005 4:58 am
Location: Perth, Western Australia

Post by Aussie_3ASCV »

Hey guys just blew my clutch 4wding and i need some advice or pretty much step by step info on how to remove my old clutch then install the new one. Underneath the tercel looks a bit more confusing than most cars ive worked on. any help asap would be greatly appreciated.

thanks
84 SR5, 4A, 75W Globes, CB Radio, Twin 13" Subs with Twin 750W Amps, Neons, 15" Enkei Rims Fitted With 215 65-15 Tyres, 200000Km on clock, GPS, Hood Scoop and plenty more to come. I love my terc
shogun
Highest Ranking Member
Posts: 784
Joined: Thu Mar 31, 2005 1:48 pm

Post by shogun »

it si best you take the engine out, look for the fsm here in a previous post
there is the process to change the clutch
tercel 4wd custom suspension, under drive pulley, vented brakes, cold air intake, and plenty more to come
xirdneh
Highest Ranking Member
Posts: 2124
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Post by xirdneh »

Aussie_3ASCV wrote: bit more confusing than most cars ive worked on. any help asap would be greatly appreciated.

thanks
i just put some info in "transmission swap" post
Love those Tercell 4x4 wagons but they sure suffer from road noise.
Post Reply