Tercel4WD.com

Ive put on much bigger tyres on the car. I dont have a picture but ill take one when i remember. I think it gave a 2cm lift or so. Car looks much better.

I got this project a bit onwards during last week. I did improve exhaust mounts and I did remake rear brake lines. They were completely rusted out but I remade them with some copper brake pipe. In the end my brake lines, pads and front rotors had still enough material. I still need to buy rear ...

I got this project a bit onwards during last week. I did improve exhaust mounts and I did remake rear brake lines. They were completely rusted out but I remade them with some copper brake pipe. In the end my brake lines, pads and front rotors had still enough material. I still need to buy rear ...

Hi!
I have a little side note if someone might have need of this in the future.I have already fixed the issue but im sharing my findings to members.

I belive this is good to know information in these aging cars and rusty fuel pipes and hoses that deteriorate over time.

I had an ongoing issue ...

IMG_20241022_162039.jpg I have a 1988 4wd corolla ae95 which are rare in sweden. Havent seen one for sale in years. I have restored it completely and its my second daily driver together with my tercel. Its easier to drive and the 4wd is always on with a lockable center diff. Its easier to manage ...

I can add a point after ive had the car for a while. I've had similar issues since i did the initial fix. it has always been a fuel starvation issue all those times. Mostly it has been the fuel filter ive added directly after the fuel tank. Ive had issues with rusty tanks since the restoration. ive ...

It could be a fault in the circuit. Ive had other toyotas including my tercel have issues with the lights not working properly and what not. I replaced a alternator and the voltage regulator and the issue still persisted. The new voltage regulator was broken, when i put in the original one it worked ...

Looks like youll need a new pickup tube thing. I dont know where to get one. Luckily the gas tank i got from a wreckers had a homemade one made out of copper tubes and works great. Someone soldered copper pipes to a metal disc and cut them to length and made the right bends. Will outlast the tank!

I intend to keep the emissions stuff working as is. I have drilled out the carb now and the car runs alittle better. I reokaced the valve seals and been tinkering with the car. I had to repair the gas tank again but its not leaking anymore. The car has been running great since my last tune up and ...

Look nice! Nice to see a different color combo for the interior. Where in finland do you live? I make trips to the salla area sometimes. =) I have a 86 tercel that i restored.

I dont recognize the HIC valve mentioned in the picture. I cant remember seeing it on the engine. im going to prob check the carb and drill the holes slightly bigger to juice the car just slightly. the weak engine of the tercel is annoying lol. i have a corolla 4wd 1988 with 105 hp and it runs so ...

Mine doesnt have any catalytic converter but it does have points ignition. I would have prefered the electric ignition over the points one ive had some issues getting it to work as good as i wanted. Im planning on doing some servicing to the car this week. Valve stem seals and a wheel bearing is ...

Mine doesnt have any catalytic converter but it does have points ignition. I would have prefered the electric ignition over the points one ive had some issues getting it to work as good as i wanted. Im planning on doing some servicing to the car this week. Valve stem seals and a wheel bearing is a ...

It is a 3A engine. Im still looking for a 4A to put in it. Havent sourced one i want to use yet. Might have another 3A if a guy i helped will replace his engine. He had low compression on one cylinder. Either a burnt exhaust valve due to a leaky intake or headgasket. Either way fixable issues. Then ...

Highly recommended this for ameliorating gear noise in worn gear sets. No downside if it’s just going into the rear diff.
https://www.liqui-moly.com/en/us/mos2-antifriction-for-gears-p000009.html?gad_source=1&gclid=CjwKCAiAnL-sBhBnEiwAJRGigsdqST ...