Tercel4WD.com

There is an unlabeled port next to the dryer on the passenger side of the car. The AC diagrams all seem to point to that being the high side port (discharge side - liquid). The only low side (suction side - gas) is on top of the compressor under the alternator. And you have move the alternator up ...

Heyo!

The last handful of SR5s that showed up at local pick 'n pulls have not had either so figured it may be worth posting up here!

Hoping to source rear mud flaps and a grey inclinometer housing as mine has disintegrated... I'm located in Santa Cruz, CA and happy to cover shipping!


Happy ...

I’ve seen negative reviews/comments about them on forums such as Toyota Nation and Reddit. One person wrote, “The prices are cheap but these guys are horrible- you have to PRAY they get the order right and that you don't have to deal with their return department. Otherwise god help you.” After ...

Care4cars wrote: Sun Apr 27, 2025 11:52 pm Torque specs on clutch pressure plate on 1986 Toyota Tercel wagon sr5 and can I get a copy of the Manuel if anyone knows where to find one

start a new thread next time please.

https://tercel4wd.com/fsm/1985T4WD.pdf

there should be a low side service port near the drier as well.

terceldude wrote: Thu Apr 10, 2025 2:52 pm

GTSSportCoupe wrote: Tue May 31, 2005 9:10 am I can't see the photos either!

Welcome to the forum sakhalin!! It is good to have you here.

Where are you bro?

why are you replying to a 20 year old thread where the guy you are responding to hasnt been online since 2019? jfc...

terceldude wrote: Thu Apr 10, 2025 5:27 pm there was no GEN 2. That would be PERIOD 2

a. its gen 2
b. why are you replying to an 11 year old thread
c. you wont get a response from OP as he passed away

Looking for a transmission for my 85.
Are there directions on this board for testing a transmission at a wrecking yard?


sign of trans health is to pull the input shaft and see how sharp the teeth are, and how worn down the bearing journal is. if the teeth are thin and sharp, or the journal is ...

thats an interesting import -- 2 door tercel with the spicy motor. i would love to do the swap, but it would be a monumental undertaking -- every single vacuum line and component would have to be swapped over between the two motors. and then, not having any info would make it hard to fix the down ...

check the tercel4wd fb group. however, being in NY, i doubt there are many good ones left between the salt and inspections.

I'm not clear on what this wiring harness is for. Do you use it with the stock 83-86 bulbs to increase the voltage they get?

In my '87, I put in these LED bulbs a few years ago and have been really happy with them. They're one of the best bang for the buck mods I have come across.

https://www ...

tercel,

I’m not suggesting an overhaul or anything. I would expect you could get things back in order much more easily with the transmission out of the car.

Chris


either way, it has to come out, and get completely torn down. my guess is one of two things -- 1. the reverse idler came out of ...

Keegan wins this round, lol.

Tercle, it sounds like you will need to remove the plug you filled the trans from and shine a light in and use a screwdriver to get the fork in there back into the right spot before putting the plug back in. That should fix it.

I always fill from the plug directly ...

which fill bolt did you remove?

I am not a good welder, my skills are rusty since I rarely do it, and I find a skilled friend to do it for me if it is important. but I have seen the inexpensive wire feed portable welder from Harbor Freight being used, and for light welding seemed to work very well. Easy to use, and cheap. A ...