Tercel4WD.com

is the frame rusty? Maybe it's too hard to change/harvest a frame. Mine has frame damage, and it needs about 300 to fix it.

too far from me... maybe I should move closer

looks good, but I am afraid I am not a quick learner to drive it back to east coast.

I was looking for one 4wd automatic, but bought one 2wd with hope, and spent too much on it already

waiting for the pictures:)

so we will have to wait till next spring to drive it?

Thanks. I won't mess up the idle/air mixture screw now.
I only adjust the idle speed screw, not the fast idle screw, because it has to plug the tubes first. Was it the reason why it didn't change the engine idle speed? cold start is fine, and it idles better when it's not in gear. Don't know what ...

update:
I spray the carburetor cleaner to those vacuum tubes connections, engine sounds normal-no change. I clockwise turned the idle speed adjust screw(upper one), no big change - It vibrated less if I press gas pedal a little bit.
Is it related to the air/oil mixture adjust? Is there anything I ...

Thanks a lot for all the comments.
I cannot see the engine speed as of newer car, otherwise I would know it's the limit of the car. I blame the throttle cable for it's not fully utilize the engine power when I found it's loose. The pictures says all, now I know the limit.
It was blocking the traffic ...

Thanks, Tom. I think I got the wrong part.

The vibration is not subtle, I have been drive 4 cylinder car for several years, and it's worse than that. on flat ground, it's hard to accelerate over 70, the speedometer has 110 on it, so I suppose it can do better. it got 33 while driving under 65.
The ...

if it's gonna only need oil, I can deal with that. I have one (FWD) and I don't know how much I will have to put in to have it registered. BTW, the pictures are not showing correctly.

Some new things I noticed while I was driving it back.
It's not easy to get above 70mph, I noticed the throttle valve adjust cable is loose (gas pedal is loose too), and adjust the nuts behind the carburetor seems not help, need a new cable or it's different style of adjusting? Thanks.

Thanks guys.
I should add the details of my car at first. I recently bought it from FL for less rust. It's a 3A engine, auto, fwd, 210000mile. It vibrates before I drove it from fl to MD with potentially bad outer tie rod(LF) and driving shaft(LF, bad boot). It needs alignment since the right front ...

Hi all,
my 1987 fwd wagon vibrates when it's not moving, like at the traffic lights, in park.
I was told it might be the engine mount /motor mount, but I cannot find all the engine mounts, i ordered parts thru autozone and aap, they came in different size.
Could anybody here give me some directions ...