Tercel4WD.com

OK I received the idle jets I ordered and installed a 65 primary idle and 60 secondary idle jet. I was able to get it idling with no smoke! Unfortunately when you rev it in to the primary main jet it still smoked. So I took the top off the carb and the jets inside the fuel bowl at the bottom are ...

(which I broke a nipple off of and had to epoxy the hole shut :(...)

Ha! I just did that two nights ago. I had some "Amazing Goop" left over from my shifter boot project so I used a bunch of that and superglued around the base of the gas filter as well. I think there was a slight vac leak at the ...

Update: I have removed the EGR and moved the PCV to that location. I have also hooked the bottom port on the distributor vac can to the gas filter manifold vacuum (which I broke a nipple off of and had to epoxy the hole shut :(...) Car runs great, just lean (white sparkplugs). Gonna have to wait ...

You guys are awesome. I can't believe how great the people on this forum are. Better than any other forum I am a member of except maybe badgerandblade.com and it's a tie between the two...

Back on subject...I have ordered the following:

*60 Primary Idle Jet
*65 Primary Idle Jet
*70 Primary Idle ...

normal settings when not doing emissions:
pri.
idle 60
main 140
air 180
sec.
idle 50
main 150
air 165

timing 15 degrees btdc


Gatemaster:
So it sounds like if I'm running at sea level, I should be looking for jets that are smaller than what you have listed here since I'll have more dense air ...

So my idle jets are Primary (55) and Secondary (50). I have to back the mixture screw out 4 full turns for the car to idle smoothly and then the car's a mosquito fogger. I called Redline and they said that my Primary idle jet is too small and I need to go bigger. Does this sound right? Should I go ...

Wow! AWESOME info...and much needed! Thank you! I will post back tomorrow with my jet sizes and pics of my setup. Thanks again!

OK Weberholics...Here is my dilemma...I installed the Redline K740 kit on to my Tercel which has a 4a in it. The car runs GREAT but is running rich. No matter what I do. I have went through the procedure for best lean idle adjustment according to the redline weber documentation multiple times. With ...

Jeez, this is really getting to be a hot topic. I just installed a Weber and used the Vac port on the side of the Weber. Now I am reading that some are using the manifold (gas filter) vacuum for vac advance. So which is it? I have read all the posts on this forum concerning both sides of this ...

Thanks so much for all replies. I live in Seymour, TN right outside of Knoxville, TN. The Tercel has always just been in the family...I learned to drive on it. I'm 30 now. I decided to take it for this winter because I didn't have anything 4wd (I sold my Tundra last April and bought a Mazdaspeed3 ...

Does anyone know how to remove the black door trim/gutter from the side of the back door on the outside? I believe there may be tons of crap underneath mine.
http://carriganfamily.com/var/albums/Family-Cars/2010-10-16_12-46-28_97-1.jpg?m=1289602945
Oh by the way I'm new here. My name's Jeremy ...