Front crankshaft speedy sleeve installation tool

General discussion about our beloved Tercel 4WD cars
Post Reply
User avatar
MrWrench
Top Notch Member
Posts: 252
Joined: Sun Feb 03, 2019 9:10 pm
My tercel:: 1985 Tercel SR5. aka Spud
Location: Michigan
Contact:

Front crankshaft speedy sleeve installation tool

Post by MrWrench »

Hey everyone, just thought I would share a custom driver I had made for the speedy sleeves on the front crankshaft. The factory installation tool is too short to fit all the way. I wasn't able to find anything around my shop to finish the installation and ended up damaging the sleeve.

If anybody is in need, I would gladly rent the tool for free provided you ship it back to me when you're done. We can coordinate the details via a PM.
PXL_20211108_132435473-1.jpg
PXL_20211107_162308164_1.jpg
You do not have the required permissions to view the files attached to this post.
1984 SR5. Lifted offroader with a snorkel. Aka "Thunderbucket"
1985 SR5. Daily driver. Aka "Spud"
1986 SR5. Dakar Rally clone build.
Post Reply