Crank Keyway

This is a forum JUST for posting part numbers.
Post Reply
JDNightFox
Top Notch Member
Posts: 171
Joined: Sun Nov 01, 2015 5:39 pm
My tercel:: toyota
Location: CA

Crank Keyway

Post by JDNightFox »

So after some digging I pulled off my beat up woodruff key and measured the dimensions as best as I could, and then went on the O'Reilly website and matched it up to Dorman part number 595-061

My dimensions (rounding as best as I could): 5mm thickness, 8mm height, 18mm length

I just tapped the Dorman one into place on my engine and it fits! It is about as snug as it can be, the thickness may be slightly less than a metric option but it cost $0.75 and there is barely any rotational slop in the crank pulley.


Thought I'd let you all know!

keywords so other people can search for this later: timing gear, timing set, crankshaft, crank key
xirdneh
Highest Ranking Member
Posts: 2121
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Re: Crank Keyway

Post by xirdneh »

cool
Love those Tercell 4x4 wagons but they sure suffer from road noise.
User avatar
BaileySims
Highest Ranking Member
Posts: 626
Joined: Sat Aug 30, 2014 6:52 pm
My tercel:: 1983 Tercel SR5 4WD
Location: Texas
Contact:

Re: Crank Keyway

Post by BaileySims »

Hell yes. I'll have that bolt sent out tomorrow.
WAGON MAFIA.
Blood, sweat and beers.
Post Reply