Blower (fan) motor resistor

This is a forum JUST for posting part numbers.
Post Reply
xirdneh
Highest Ranking Member
Posts: 2121
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Blower (fan) motor resistor

Post by xirdneh »

Airtex 3A1213
looks just like original
if your only getting 1 or 2 speeds out of 4 on your blower
remove
plastic shroud around radio (4 sheetmetal screws) makes it easier to get at glove compartment bolt
plastic speaker cover on right side of glove box (2 sheetmetal screws)
glove compartment (2 10 mm bolts)
two pieces of black plastic vent (2 sheetmetal screws)
the resisitor is near top of heatercore housing
to get plug off you have to depress top center of plug
one small phillips head screw holds resister in place (stubby phillips screwdriver)
Love those Tercell 4x4 wagons but they sure suffer from road noise.
Post Reply