3-AC hop-up or motor swap

How-to's and repair secrets for your 4WD can be found here. Have a question? Ask it in here!
teranfirbt
Highest Ranking Member
Posts: 519
Joined: Mon Mar 30, 2009 12:58 am
My tercel:: '86 SR5 4WD, 5AFE, lifted rear, 195/70/14 tires
Location: Seattle, WA

Re: 3-AC hop-up or motor swap

Post by teranfirbt »

Sweet! Will be interesting to see how those carbs respond to the plenum.
I wish I had room for a mill... and a lathe... and a TIG... I do ok with a drill press and MIG, but so many more options open up with more equipment! Not that I have time :(
new2yotas
Member
Posts: 26
Joined: Mon Sep 14, 2015 4:12 am
My tercel:: 1983 tercel 4x4 sr5
Location: klamath falls , Or

Re: 3-AC hop-up or motor swap

Post by new2yotas »

Turns out you cant flush mount these carbs and utilize the factory linkage, so I decided to make spacers..i cant believe im up this early..
carb spacer 001.jpg
You do not have the required permissions to view the files attached to this post.
BL8R29
Member
Posts: 33
Joined: Wed Jan 18, 2023 5:41 pm
My tercel:: 1985white

Re: 3-AC hop-up or motor swap

Post by BL8R29 »

larry mcgrath wrote: Sun Sep 20, 2015 10:00 am I installed a 4age JDM v/20 black top , a couple of years ago. This set up has about 28,000 miles on it so far, you cant rev this up -red line is 8200 - and drop the clutch, the drive line would'nt take it for long. This made this little car realy runnnnnnnnnnnn. Kicked a Audi A6 2.8 leters ass 2 weeks ago , at 125 MPH, in Helena Montana. This guy was REALY PIIIIIISSSSED. This was a lot of work to do , not plug and play by any means. The wright up is in the gallery under Larrys tercel gets a v20 B/T, on page 2. Larry
Post Reply