FRONT DRIVE SHAFTS

Need a car part and don't know where to get it or how to install it. Look here!
Post Reply
User avatar
solarlord
Top Notch Member
Posts: 180
Joined: Sat Apr 16, 2011 2:39 pm
My tercel:: 1987 4wd Swiss model
Location: cheadle england
Contact:

FRONT DRIVE SHAFTS

Post by solarlord »

HELLO to all - MY FIRST POST- i have a 1987 tercel 4wd both front DRIVE SHAFTS are buckled - I need to get hold of a front left and right shaft either second hand or new
I m in the UK the car is in Spain -its done 140.000km (90.000mile)-Has anyone any ideas where i can get spares in the UK or from anywhere in the world that will ship them- thanks to everyone in anticipation -SOLARLORD :?:
User avatar
dlb
Highest Ranking Member
Posts: 7448
Joined: Mon Jul 06, 2009 9:03 pm
My tercel:: '87 sr5, '83 dlx parts car
Location: bc, canada

Re: FRONT DRIVE SHAFTS

Post by dlb »

call any parts store, they should be able to get your remanufactured ones at the very least. call around to see if you can get new ones though, remans are junk, generally, and have a short lifespan.

welcome to the board!
User avatar
Petros
Highest Ranking Member
Posts: 11941
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: FRONT DRIVE SHAFTS

Post by Petros »

welcome to the list!

It might also help you to know that the same front axle assembly (typically called "CV axles") were used on all Tercel4wd from '83 to '88, and on all Front Wheel drive (2wd) Tercels from '83 to 86.

I also highly recommend finding new axles, not rebuilt if possible. If you can only find rebuilt cv-axles, before you leave the parts store take them out of the box and twist the axles joints by hand back and forth to check for play (should be none), and that they pivot smoothly without binding. Half of the rebuilt cv axles are junk right out of the box. New ones have always proven to be good and last longer.

Good luck in your search.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
User avatar
ARCHINSTL
Goldie Forever
Posts: 6369
Joined: Sat Apr 30, 2005 1:52 pm
My tercel:: Goldie is a 1986 SR5 attualmente con Weber/also owned the first T4WD in STL in late '82
Location: Kirkwood, a 'burb of St. Louis

Re: FRONT DRIVE SHAFTS

Post by ARCHINSTL »

Welcome to the Club!
Look for GSP brand new axles. It is a Chinese company that distributes worldwide and should be able to give you a distributor. The web site is http://www.gsp.cn/en/?id0=1; the North American web site is http://us.gsp.cn/main/
Several of us, including me, have installed them and they work fine. Also install new seals - any Toy dealer should be able to get them, if you have trouble finding at parts store (I think other cars use the same seal).
Tom M.
T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
User avatar
solarlord
Top Notch Member
Posts: 180
Joined: Sat Apr 16, 2011 2:39 pm
My tercel:: 1987 4wd Swiss model
Location: cheadle england
Contact:

Re: FRONT DRIVE SHAFTS

Post by solarlord »

TOM AND PETROS- Thanks for the info-im glad i joined the board -thanks again DEREK - PS anyone do i need part numbers front left and right cv axles?
Post Reply