Front Upper Strut Braces: Custom Fabricated: $125 Order Now!
-
- Top Notch Member
- Posts: 101
- Joined: Thu Oct 28, 2010 10:18 pm
- My tercel:: 1987
- Location: Berkeley, CA
Front Upper Strut Braces: Custom Fabricated: $125 Order Now!
$125.00
Let me know who wants them.
The fabricator has made braces for hotrods and will use industry-standard steel tubing, welds and plating for strut-brace applications.
Price is for front upper and, if it comes in lower than that, will cover a portion of shipping. As for the price, that's not exactly what he quotes and he ummed and ahhed a bit as he didn't exactly know but it will be inside $5/10 either way.
I'll be getting mice done later this week, though it would be swell if I had other orders to swing his way. I might even have some swanky vinyl decals made up to add that cool touch!
Let me know who wants them.
The fabricator has made braces for hotrods and will use industry-standard steel tubing, welds and plating for strut-brace applications.
Price is for front upper and, if it comes in lower than that, will cover a portion of shipping. As for the price, that's not exactly what he quotes and he ummed and ahhed a bit as he didn't exactly know but it will be inside $5/10 either way.
I'll be getting mice done later this week, though it would be swell if I had other orders to swing his way. I might even have some swanky vinyl decals made up to add that cool touch!
Last edited by St6fan on Mon Nov 08, 2010 3:42 pm, edited 2 times in total.
1986 Tercel 4WD Slug-On-Rails
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
-
- Top Notch Member
- Posts: 201
- Joined: Fri Aug 27, 2010 11:12 pm
- My tercel:: 1984 DLX 4WD
- Location: Tacoma, Washington
- Contact:
Re: Any Interest in Front and Rear Upper Strut Braces?
i might be interested for sure!
"Any car which holds together for an entire race is entirely too heavy" -Colin Chapman
84' DLX with 6 speed (the project beast) 'Tora'
84' SR5 'Tori' (the daily driver)
08' Scion xB
04' Kawasaki Z1000
84' DLX with 6 speed (the project beast) 'Tora'
84' SR5 'Tori' (the daily driver)
08' Scion xB
04' Kawasaki Z1000
-
- Top Notch Member
- Posts: 101
- Joined: Thu Oct 28, 2010 10:18 pm
- My tercel:: 1987
- Location: Berkeley, CA
Re: Any Interest in Front and Rear Upper Strut Braces?
Might be interested for sure? That's a good oxymoron you got going there!ohcanada_00 wrote:i might be interested for sure!
(I'll put you on the list.)
1986 Tercel 4WD Slug-On-Rails
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
-
- Highest Ranking Member
- Posts: 563
- Joined: Sun Mar 30, 2008 6:51 pm
- My tercel:: 1985 tercel 4wd
- Location: Chico, Norcal
Re: Any Interest in Front and Rear Upper Strut Braces?
I'm interested in a brace for the front shock towers.
Rear upper strut brace? Not really sure what you are thinking about since the t4wd has shocks in the back.
Rear upper strut brace? Not really sure what you are thinking about since the t4wd has shocks in the back.
-
- Top Notch Member
- Posts: 101
- Joined: Thu Oct 28, 2010 10:18 pm
- My tercel:: 1987
- Location: Berkeley, CA
Re: Any Interest in Front and Rear Upper Strut Braces?
Semantics aside, I'm sure you understand I mean bracing between the top of the rear shocks under the little covers in the trunk, right?4wdchico wrote:I'm interested in a brace for the front shock towers.
Rear upper strut brace? Not really sure what you are thinking about since the t4wd has shocks in the back.
1986 Tercel 4WD Slug-On-Rails
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
-
- Top Notch Member
- Posts: 101
- Joined: Thu Oct 28, 2010 10:18 pm
- My tercel:: 1987
- Location: Berkeley, CA
Re: Any Interest in Front and Rear Upper Strut Braces?
Perhaps I should look into anti-roll bars and subframe locking options too?
If we could find a solution to stiffen up the car - a lot - for a few hundred per kit, that would be fab!
If we could find a solution to stiffen up the car - a lot - for a few hundred per kit, that would be fab!
1986 Tercel 4WD Slug-On-Rails
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
-
- Top Notch Member
- Posts: 201
- Joined: Fri Aug 27, 2010 11:12 pm
- My tercel:: 1984 DLX 4WD
- Location: Tacoma, Washington
- Contact:
Re: Any Interest in Front and Rear Upper Strut Braces?
especially since I am lowering the car, the more bracing I have the better! I'm very interested!
"Any car which holds together for an entire race is entirely too heavy" -Colin Chapman
84' DLX with 6 speed (the project beast) 'Tora'
84' SR5 'Tori' (the daily driver)
08' Scion xB
04' Kawasaki Z1000
84' DLX with 6 speed (the project beast) 'Tora'
84' SR5 'Tori' (the daily driver)
08' Scion xB
04' Kawasaki Z1000
-
- Top Notch Member
- Posts: 101
- Joined: Thu Oct 28, 2010 10:18 pm
- My tercel:: 1987
- Location: Berkeley, CA
Re: Any Interest in Front and Rear Upper Strut Braces?
Lowering how? I'm interested in coilovers if you can find them - or anything else you've found out.ohcanada_00 wrote:especially since I am lowering the car, the more bracing I have the better! I'm very interested!
I'll get a quote tomorrow/Tuesday.
1986 Tercel 4WD Slug-On-Rails
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
-
- Top Notch Member
- Posts: 201
- Joined: Fri Aug 27, 2010 11:12 pm
- My tercel:: 1984 DLX 4WD
- Location: Tacoma, Washington
- Contact:
Re: Any Interest in Front and Rear Upper Strut Braces?
for right now, since i have a new set of coils, I am chopping a coil off my old ones, ahem, g-hetto style. when i can afford it, i plan to go airbags
"Any car which holds together for an entire race is entirely too heavy" -Colin Chapman
84' DLX with 6 speed (the project beast) 'Tora'
84' SR5 'Tori' (the daily driver)
08' Scion xB
04' Kawasaki Z1000
84' DLX with 6 speed (the project beast) 'Tora'
84' SR5 'Tori' (the daily driver)
08' Scion xB
04' Kawasaki Z1000
- Petros
- Highest Ranking Member
- Posts: 11934
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: Any Interest in Front and Rear Upper Strut Braces?
I might be interested in the front strut brace.
DO not bother with a rear one. There is NO benefit to putting a brace between the tops of the rear dampers (shock absorbers). The rear axle is braced directly through the frame off the 4 bar trailing links, and the Panhard rod (or lateral link). Get the RWD corolla trailing links and panhard rod set, it will fit and make the rear much stiffer. You can also get the rear anti sway bar kit for the same car, it will fit on the Tercel4wd.
There are coil over shocks available for the rear, the same ones that fit the RWD corolla (including the GTS corolla) will fit. I saw a set on Craig's list the other day for "only" $1200. A number of other model front struts can be made to work, including the rear struts for the first gen MR2 rears (same travel as the Tercel fronts!). I am consider putting a set in mine, but the spring rate is almost 3 times that of the Tercel! I am considering using just the struts and not the springs.
Also something interesting, the front strut top mount (with the bearing in it) from first gen MR2 (AW11), will also work in the front of the Tercel. Same bolt pattern, drops it about an inch, but much stiffer and stronger. That means there are kits for the strut top that are fully adjustable that will also work in the Tercel.
DO not bother with a rear one. There is NO benefit to putting a brace between the tops of the rear dampers (shock absorbers). The rear axle is braced directly through the frame off the 4 bar trailing links, and the Panhard rod (or lateral link). Get the RWD corolla trailing links and panhard rod set, it will fit and make the rear much stiffer. You can also get the rear anti sway bar kit for the same car, it will fit on the Tercel4wd.
There are coil over shocks available for the rear, the same ones that fit the RWD corolla (including the GTS corolla) will fit. I saw a set on Craig's list the other day for "only" $1200. A number of other model front struts can be made to work, including the rear struts for the first gen MR2 rears (same travel as the Tercel fronts!). I am consider putting a set in mine, but the spring rate is almost 3 times that of the Tercel! I am considering using just the struts and not the springs.
Also something interesting, the front strut top mount (with the bearing in it) from first gen MR2 (AW11), will also work in the front of the Tercel. Same bolt pattern, drops it about an inch, but much stiffer and stronger. That means there are kits for the strut top that are fully adjustable that will also work in the Tercel.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
-
- Top Notch Member
- Posts: 101
- Joined: Thu Oct 28, 2010 10:18 pm
- My tercel:: 1987
- Location: Berkeley, CA
Re: Any Interest in Front and Rear Upper Strut Braces?
Argh - so much information!!!Petros wrote:I might be interested in the front strut brace.
DO not bother with a rear one. There is NO benefit to putting a brace between the tops of the rear dampers (shock absorbers). The rear axle is braced directly through the frame off the 4 bar trailing links, and the Panhard rod (or lateral link). Get the RWD corolla trailing links and panhard rod set, it will fit and make the rear much stiffer. You can also get the rear anti sway bar kit for the same car, it will fit on the Tercel4wd.
There are coil over shocks available for the rear, the same ones that fit the RWD corolla (including the GTS corolla) will fit. I saw a set on Craig's list the other day for "only" $1200. A number of other model front struts can be made to work, including the rear struts for the first gen MR2 rears (same travel as the Tercel fronts!). I am consider putting a set in mine, but the spring rate is almost 3 times that of the Tercel! I am considering using just the struts and not the springs.
Also something interesting, the front strut top mount (with the bearing in it) from first gen MR2 (AW11), will also work in the front of the Tercel. Same bolt pattern, drops it about an inch, but much stiffer and stronger. That means there are kits for the strut top that are fully adjustable that will also work in the Tercel.
Thanks for the heads-up.
I have more questions - perhaps I couls email/drop you a call at some point, given we're practically neighbours and all!
Look, thanks for the advice, much appreciated!
Now it's off the fabber!
1986 Tercel 4WD Slug-On-Rails
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
-
- Top Notch Member
- Posts: 101
- Joined: Thu Oct 28, 2010 10:18 pm
- My tercel:: 1987
- Location: Berkeley, CA
Re: Any Interest in Front and Rear Upper Strut Braces?
$125.00
Let me know who wants them.
The fabricator has made braces for hotrods and will use industry-standard steel tubing, welds and plating for strut-brace applications.
Price is for front upper and, if it comes in lower than that, will cover a portion of shipping. As for the price, that's not exactly what he quotes and he ummed and ahhed a bit as he didn't exactly know but it will be inside $5/10 either way.
I'll be getting mice done later this week, though it would be swell if I had other orders to swing his way. I might even have some swanky vinyl decals made up to add that cool touch!
Let me know who wants them.
The fabricator has made braces for hotrods and will use industry-standard steel tubing, welds and plating for strut-brace applications.
Price is for front upper and, if it comes in lower than that, will cover a portion of shipping. As for the price, that's not exactly what he quotes and he ummed and ahhed a bit as he didn't exactly know but it will be inside $5/10 either way.
I'll be getting mice done later this week, though it would be swell if I had other orders to swing his way. I might even have some swanky vinyl decals made up to add that cool touch!
1986 Tercel 4WD Slug-On-Rails
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
-
- Top Notch Member
- Posts: 201
- Joined: Fri Aug 27, 2010 11:12 pm
- My tercel:: 1984 DLX 4WD
- Location: Tacoma, Washington
- Contact:
Re: Front Upper Strut Braces: Custom Fabricated: $125 Order
for that price point, I'm in.
"Any car which holds together for an entire race is entirely too heavy" -Colin Chapman
84' DLX with 6 speed (the project beast) 'Tora'
84' SR5 'Tori' (the daily driver)
08' Scion xB
04' Kawasaki Z1000
84' DLX with 6 speed (the project beast) 'Tora'
84' SR5 'Tori' (the daily driver)
08' Scion xB
04' Kawasaki Z1000
- ARCHINSTL
- Goldie Forever
- Posts: 6369
- Joined: Sat Apr 30, 2005 1:52 pm
- My tercel:: Goldie is a 1986 SR5 attualmente con Weber/also owned the first T4WD in STL in late '82
- Location: Kirkwood, a 'burb of St. Louis
Re: Front Upper Strut Braces: Custom Fabricated: $125 Order
I will - but - after the first of the year; I've spent too much this year, what with the Daisys, tires, propeller shaft,the Bosal muffler/pipe and front pipe, and rear bearings, bushings, and KYBs.
Tom M.
Tom M.
T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
-
- Top Notch Member
- Posts: 101
- Joined: Thu Oct 28, 2010 10:18 pm
- My tercel:: 1987
- Location: Berkeley, CA
Re: Front Upper Strut Braces: Custom Fabricated: $125 Order
Okay, not a problem.
Just email me: stefan@eurodroid.com with order details. You'll have to send me a cheque - though I can provide you with ID and you can even call my bank to verify I'm a real non-scamming type person and of course you can call me at home/cell/whatever.
So, thus far we have two orders. Anyone else (Petros?) let me know - you could pick it, saving on shipping and we could kick tyres!
This fabricator will also make *anything* else. Sway bars, etc... If there's anything the aftermarket doesn't cater for that can be made, he'll make it.
Just email me: stefan@eurodroid.com with order details. You'll have to send me a cheque - though I can provide you with ID and you can even call my bank to verify I'm a real non-scamming type person and of course you can call me at home/cell/whatever.
So, thus far we have two orders. Anyone else (Petros?) let me know - you could pick it, saving on shipping and we could kick tyres!
This fabricator will also make *anything* else. Sway bars, etc... If there's anything the aftermarket doesn't cater for that can be made, he'll make it.
1986 Tercel 4WD Slug-On-Rails
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)
1969 Miro 12' Skiff with 15HP Evinrude
2006 Prius (Sorry, but I totally love it)