Typrus wrote:Adjust the mix screw in...
Why can't they make them as simple and good of fuel economy as in the days of yore?
Emissions standards.
....my buddy can get 26mpg (GPS confirmed over the course of 10+ tanks so shut up with the criticism or go complain to your cat or tub of ice cream) in his 1974 Chevelle Malibu Classic 4-door sedan with a slightly warmed up small block 350 and Turbo-HydraMatic 350 transmission. ....Heck, what'll a Viper get on the freeway? 30mpg in real-life? I think that's what the guy who comes into the Zone who has the 3 Vipers was saying... 28-32 freeway? Low 20's city?
I really wish they could make old carbureted beasties. But they just wouldn't be up to snuff for regulations.
I could get into the 40's in my Terc.
Hell, in my folks Passat, I can get 46mpg, shredding tires at every intersection and literally smoking everybody. 46mpg threading the needle on I-25 at 100MPH. Don't tell me power and economy don't sometimes go hand in hand. Yes, its a diesel, but big friggin whoop. It still shows the point.
If you are an economy-crazy person, go buy a Prius and watch me laugh my butt off at you as I outrun you in my 85 3-speed Tercel. Let alone dance circles around you in our Passat and get as good or better fuel economy.
Typrus, I've been around cars since gasoline was under $.30 per gallon and I have been reading Consumers Reports, Car and Driver, Road and Track, Automobile Magazine, Popular Science, Popular Mechanics, Mechanix Illustrated and Hot Rod since the very early 1960's. That makes me an old fart.
Where do I begin? I am having a lot of trouble believing any of your post. Are you serious or are you just kidding around? These are jokes...right?
If not, I would like to see some documented proof of a 1974 Malibu even with a freshly-tuned 307 V-8 getting 26 MPG. Read any road test of that vintage and The Chevy Malibu was lucky to get half that MPG. Remember those were the days of primitive pot metal carburetors, air pumps, low compression and primitive emission controls.
The current EPA mileage numbers for a Dodge Viper are 13 MPH City and 22 Highway. I have never seen a road test where anyone gets more than the EPA highway number.
Check into the real world mileage and performance of Corvettes from the old days. You know, the ones with 4bbl carbs sitting on top of small blocks or big blocks. Compare them to the latest technology on modern small blocks. Today the Corvette is faster in all respects and gets double the miles per gallon. These are FACTS. Check them out.
There is no carburetor-equipped car that will get better mileage than one with EFI. Just about every manufacturer improves their HP and mileage on an annual basis. Modern science and engineering allow for great improvements. Modern engines have roller bearing lifters and rocker arms to reduce shear friction. Pistons are lighter, fuel is metered and injected with high pressure injectors directly into computer designed combustion chambers. In every respect modern engines are vastly superior to those of the past.
Here is a short quiz...
With regards to a modern car, will you save gasoline while coasting with the engine in gear or neutral? Hmmmm
Believe it or not the answer is "in gear." With modern computer controls, the car knows that you are coasting and fuel delivery to the injectors is completely cut off. If you put the transmission into neutral, the engine needs fuel to keep running. With a carburetor-equipped engine coasting causes high vacuum which will waste fuel. So think twice about down-shifting to save the brakes unless you need to.
What makes your Tercel so unique that it will get 40 MPG? Unless you modified it with higher compression, EFI and different cam grind it really sounds impossible.
The published 0-60 times for a Prius are about 10.5 seconds and the published 0-60 times for a 3-speed Tercel are about double that. Even a 5-speed takes 14.5 seconds. What makes yours so quick?
I am not trying to start a "flame war". I just don't like to see falsehoods being perpetrated and having young minds of mush filled with drivel. I may be a "Newbie" but I wasn't born yesterday. I have been around the block a few times. If you look at my current restoration blog you will see that I just might know what I am writing about.
I hope I haven't ruffled too many feathers of those members who have more "Time in Grade" than I do. If I have, I apologize in advance.
Cheers!
Ron B. in Lake George, NY