WTB Crankshaft Pulley/Harmonic Balancer

Need a car part and don't know where to get it or how to install it. Look here!
Post Reply
Paul
Advanced Member
Posts: 91
Joined: Sun Oct 17, 2004 8:14 am
Location: Columbus, Ohio

WTB Crankshaft Pulley/Harmonic Balancer

Post by Paul »

Hello Everyone... I have been working on bringing a 1988 T4WD back to life. Today I fired her up after a head gasket and carb rebuild, only to find the harmonic balancer separated. Would someone have a good used one for sale? Part no. 13470-15030. I have the PS pulley. Thank you!
User avatar
SirFoxx
Top Notch Member
Posts: 335
Joined: Sun Feb 05, 2017 5:42 pm
My tercel:: 1981 Toyota Tercel w/ 7age

Re: WTB Crankshaft Pulley/Harmonic Balancer

Post by SirFoxx »

if no one here has one, try the tercel4wd page on FB.
1988 DLX 4wd Tercel Wagon w/ weber (RIP)
1985 4wd Tercel SR5 (RIP)
1986 Base 2dr Hatch (RIP / PARTS)
1986 DLX 4wd Tercel Wagon with ???
1985 DLX 2dr Tercel Hatch w/manual swap
1981 2dr Toyota Tercel w/7age (RIP)
1981 3dr hatch Toyota Tercel w/Turbo 4AGE
1981 3dr hatch Toyota Tercel SR-5
Paul
Advanced Member
Posts: 91
Joined: Sun Oct 17, 2004 8:14 am
Location: Columbus, Ohio

Re: WTB Crankshaft Pulley/Harmonic Balancer

Post by Paul »

Thanks for the reply SirFoxx. That might be good reason for me to get a FB account, after resisting all these years.
I hate to admit it, but I tried rebonding with high temp silicone, but it failed instantly at startup. I can also share that the SKP balancer SK594237 fits the shaft, but hits the timing cover (shown for 1BBL on Rockauto)... the bolt hole spacing for PS pulley is also different. HBRepair looks like a good solution, but their shop is closed in December. Maybe I need to take a break for awhile.
User avatar
NWMO
Highest Ranking Member
Posts: 1615
Joined: Wed May 20, 2015 1:08 pm

Re: WTB Crankshaft Pulley/Harmonic Balancer

Post by NWMO »

Hey Paul,

That was one of the early parts sold off my part’s car and I know my buddy sold one as well. I would try Luke Anthony on the FB page (which I enjoy). I do have family that despise FB, so I understand some wanting to avoid it. I will message Luke and let him know about this thread, he goes by MrWrench here and is a wonderful fellow.

Chris
Psalm 37:4 "Delight yourself in the Lord and he will give you the desires of your heart"

In remembrance of my friend ARCHINSTL:

T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"

"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
User avatar
MrWrench
Top Notch Member
Posts: 252
Joined: Sun Feb 03, 2019 9:10 pm
My tercel:: 1985 Tercel SR5. aka Spud
Location: Michigan
Contact:

Re: WTB Crankshaft Pulley/Harmonic Balancer

Post by MrWrench »

Hey Paul, send me a PM and I can get you one sent.
1984 SR5. Lifted offroader with a snorkel. Aka "Thunderbucket"
1985 SR5. Daily driver. Aka "Spud"
1986 SR5. Dakar Rally clone build.
Paul
Advanced Member
Posts: 91
Joined: Sun Oct 17, 2004 8:14 am
Location: Columbus, Ohio

Re: WTB Crankshaft Pulley/Harmonic Balancer

Post by Paul »

Thanks Chris... I just sent a PM to MrWrench - while im in the junkyard of all places. I really appreciate the quick help from everyone here at this great site!
Post Reply