hi!
im actually in quebec, sherbrooke with a tercel 1987 4wd.
Im here because i really need some fenders...
the saq of quebec didnt let me pass the inspection because of that... so, i would need some new fenders, but i search on rockauto,ebay,toyotaparts deal,amazon and nothing. All disscontuned.
I was wondering, if somebody know a website or a place that i can have them...
thank you in advanced yo,
cheers
fenders
-
- Newbie
- Posts: 3
- Joined: Fri Feb 18, 2022 8:44 am
- My tercel:: 1987 4X4 Wagon
- dlb
- Highest Ranking Member
- Posts: 7366
- Joined: Mon Jul 06, 2009 9:03 pm
- My tercel:: '87 sr5, '83 dlx parts car
- Location: bc, canada
Re: fenders
welcome to the forum, raccooninblack. Someone here might have some to sell you, and you might also check on the 4wd tercel facebook group:
https://www.facebook.com/groups/tercel4wd/
https://www.facebook.com/groups/tercel4wd/
-
- Newbie
- Posts: 3
- Joined: Fri Feb 18, 2022 8:44 am
- My tercel:: 1987 4X4 Wagon
Re: fenders
ok good thx!
- Mark
- Highest Ranking Member
- Posts: 891
- Joined: Mon Apr 22, 2013 9:49 pm
- My tercel:: 1984 Automatic, 1981 sedan
- Location: Victoria, B.C.
Re: fenders
I've never understood how some provinces have vehicle inspections that fail you for having non-structural rust.
Re: fenders
Yes... in quebec its very hard to pass a car without nothing to do lol
Sad real story
Sad real story
- Petros
- Highest Ranking Member
- Posts: 11935
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: fenders
those fenders are the same for all Tercels, fwd and 4wd, sedan and wagons, from model year 1983 though 1986. and any wagon for the 1987 and 88 model years (the sedans changed design in '87). likey you will have to find good used ones.
there usually are shops in areas where they use salt that will cut out the rust, and form and weld in sheet metal to rebuild the rusted out metal parts. it is costly way to fix it, but if you can not find replacements, it may be a viable alternative.
Personally I would be tempted to just remove the rusted out fenders, and than get some sheet plastic and mount them in place instead of the metal fenders. Perhaps forming it a bit with a heat gun, and than run it back though the inspection. In the states there is no law that requires you to have factory replacement parts, especially for body parts.
there usually are shops in areas where they use salt that will cut out the rust, and form and weld in sheet metal to rebuild the rusted out metal parts. it is costly way to fix it, but if you can not find replacements, it may be a viable alternative.
Personally I would be tempted to just remove the rusted out fenders, and than get some sheet plastic and mount them in place instead of the metal fenders. Perhaps forming it a bit with a heat gun, and than run it back though the inspection. In the states there is no law that requires you to have factory replacement parts, especially for body parts.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)