ISO carburetor choke breaker diaphragm filter and hoses

This is a forum JUST for posting part numbers.
Post Reply
Shanemt
Newbie
Posts: 19
Joined: Mon Jul 22, 2019 9:00 pm
My tercel:: 1983 sr5 4wd wagon

ISO carburetor choke breaker diaphragm filter and hoses

Post by Shanemt »

This like plastic piece broke when I touched it on the back drivers side of the carburetor, and appears to be the choke breaker diaphragm filter. It says aisin 3a27 on it. I’d like to replace the hoses too, but I could also probably reuse them. Any help is much appreciated!
You do not have the required permissions to view the files attached to this post.
User avatar
Abletobecain
Top Notch Member
Posts: 415
Joined: Sun Dec 09, 2018 9:18 am
My tercel:: 1983 4WD DLX, 1986 4WD SR5, 1985 4WD SR5, 1983 4WD SR5
Location: Kitsap County
Contact:

Re: ISO carburetor choke breaker diaphragm filter and hoses

Post by Abletobecain »

That's a one way check valve I believe. You should be able to replace it with a generic aftermarket one that fits.

I'd replace all of your vacuum lines if your check valve is that brittle...likely the lines are too. You can get a roll of silicone hose on eBay for around $20. Get the 3.5mm...works perfect.
1977 BMW R100S 1WD ("Brunhilda"/Summer Fun)
1983 DLX Tercel Wagon 4WD ("Charlie"/Daily Driver)
1987 SR5 Tercel Wagon 4WD ("Sprocket"/Off-road-Camping)
1985 SR5 Tercel Wagon 4WD ("Lucky"/Project)
1983 SR5 Tercel Wagon 4WD ("Cadaver"/Parts Car)
1985 Ford F250 6.9IDI ("Franklin"/Hauler)
1987 SR5 Tercel Wagon 4WD ("Ravensburger"/in a million pieces)
2006 BMW 530XI Wagon ("Inga"/Roadtripper)
1969 Mercury Montego MX Convertible ("Big Ed"/My Dad's Old Car)
1983 SR5 Tercel Wagon 4WD ("Al"/for sale soon)
Post Reply