Engine main wire/oil pressure wire connector
Engine main wire/oil pressure wire connector
Looking for an engine main wire/ oil pressure wire connector and possibly oil pressure s/w too. Parts E and 41 in the diagram picture. Any help would be appreciated!
You do not have the required permissions to view the files attached to this post.
- BaileySims
- Highest Ranking Member
- Posts: 630
- Joined: Sat Aug 30, 2014 6:52 pm
- My tercel:: 1983 Tercel SR5 4WD
- Location: Texas
- Contact:
Re: Engine main wire/oil pressure wire connector
You may be able to fish out the rubber isolator on top of that connector and solder a new wire to the remaining strands. I've had to make a repair once like that, might have been on the same plug even.
WAGON MAFIA.
Blood, sweat and beers.
Blood, sweat and beers.
Re: Engine main wire/oil pressure wire connector
Thanks for the advice I was able to get it connector all taken apart without damaging it, and think I’ll be able to fix this one now!BaileySims wrote: ↑Fri Aug 16, 2019 8:17 pm You may be able to fish out the rubber isolator on top of that connector and solder a new wire to the remaining strands. I've had to make a repair once like that, might have been on the same plug even.
You do not have the required permissions to view the files attached to this post.