looking for the length of the lower control arm bushing sleeve
-
- Highest Ranking Member
- Posts: 515
- Joined: Thu Dec 08, 2011 6:33 pm
- My tercel:: 1985 4wd 1986fwd 1983 4wd
looking for the length of the lower control arm bushing sleeve
been playing with some polyurethane making some sway bar bushing,but i do not have a old sleeve to get the length of to test the squeeze on the bushings,
You do not have the required permissions to view the files attached to this post.
- Petros
- Highest Ranking Member
- Posts: 11933
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: looking for the length of the lower control arm bushing sleeve
I would not think you would want them the same size as the rubber bushings, the PU will compress much less so it would have to be smaller. you can determine the length of the metal sleeve from the sway bar end, it is the same length as the distance to the back stop to the shoulder where the nut bottoms out.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
- marlinh
- Highest Ranking Member
- Posts: 1584
- Joined: Sun Apr 08, 2012 9:15 am
- My tercel:: 'Everett' Blue 87 4WD Wagon (Rocky 86, recently retired)
- Location: Kootenays
Re: looking for the length of the lower control arm bushing sleeve
Hey jimcrazy, if you figure it out please share the source of those bushings.
Re: looking for the length of the lower control arm bushing sleeve
Would there be a source that anybody knows of that supplies the collar/cushion/ retainer or kit for that part?
- BaileySims
- Highest Ranking Member
- Posts: 630
- Joined: Sat Aug 30, 2014 6:52 pm
- My tercel:: 1983 Tercel SR5 4WD
- Location: Texas
- Contact:
Re: looking for the length of the lower control arm bushing sleeve
Quite some time ago, I was able to score the full set from butler toyota. You might want to give them a call.
WAGON MAFIA.
Blood, sweat and beers.
Blood, sweat and beers.
- ARCHINSTL
- Goldie Forever
- Posts: 6369
- Joined: Sat Apr 30, 2005 1:52 pm
- My tercel:: Goldie is a 1986 SR5 attualmente con Weber/also owned the first T4WD in STL in late '82
- Location: Kirkwood, a 'burb of St. Louis
Re: looking for the length of the lower control arm bushing sleeve
T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
-
- Highest Ranking Member
- Posts: 650
- Joined: Wed May 12, 2010 6:38 pm
- My tercel:: 1987 Tercel SR5 4WD wagon
- Location: Western Washington
- Contact:
Re: looking for the length of the lower control arm bushing sleeve
Doesn't Superpro make a bushing set for the Tercel? As I recall they're fairly well priced too.
(A short time later)
Why yes, yes they do: https://superpro.com.au/find/superpro-s ... -999500205
(A short time later)
Why yes, yes they do: https://superpro.com.au/find/superpro-s ... -999500205
1975 Subaru SuperStar wagon
1984 Subaru Turbo-Traction wagon & hardtop
1987 Subaru RX 3-door
1987 Subaru RX Type-RA 3-door
1987 Toyota Tercel SR5 wagon
1999 Subaru Forester S
2002 Subaru WRX sedan
2019 Subaru Outback 2.5i Limited
1984 Subaru Turbo-Traction wagon & hardtop
1987 Subaru RX 3-door
1987 Subaru RX Type-RA 3-door
1987 Toyota Tercel SR5 wagon
1999 Subaru Forester S
2002 Subaru WRX sedan
2019 Subaru Outback 2.5i Limited