how to reinforce sun damaged plastic?

Post here about...well...anything!
Post Reply
User avatar
dlb
Highest Ranking Member
Posts: 7305
Joined: Mon Jul 06, 2009 9:03 pm
My tercel:: '87 sr5, '83 dlx parts car
Location: bc, canada

how to reinforce sun damaged plastic?

Post by dlb »

someone just gave me a few vintage xmas candle lawn ornaments, like this:

Image

but the plastic is quite sun damaged. it's cracked and fairly brittle. is there anything i can paint on them to strengthen them, some kind of hardening varnish or something?

i've really missed the off-topic section of this forum, haha.
User avatar
rer233
Highest Ranking Member
Posts: 1013
Joined: Sat Jan 01, 2011 1:49 pm
My tercel:: Multiple

Re: how to reinforce sun damaged plastic?

Post by rer233 »

Now that's waaay O/T!
if it aint there, there's a good chance it won't break!
83 SR5 Silver/Blue (Snowmobile/work beater)-totaled but drivable
85 SR5 Blue
88 SR5 White (the 'good' one)-not anymore-totaled
87 fwd silver wagon a/t
87 4wd dx Cream (a/t- not anymore- now m/t)
User avatar
ARCHINSTL
Goldie Forever
Posts: 6369
Joined: Sat Apr 30, 2005 1:52 pm
My tercel:: Goldie is a 1986 SR5 attualmente con Weber/also owned the first T4WD in STL in late '82
Location: Kirkwood, a 'burb of St. Louis

Re: how to reinforce sun damaged plastic?

Post by ARCHINSTL »

T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
User avatar
Petros
Highest Ranking Member
Posts: 11930
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: how to reinforce sun damaged plastic?

Post by Petros »

try using a heat gun on them. work a small area at a time, when you heat the plastic to just below melting point it gets the molecules to rebond together, the sun breaks the cross linking that causes the damage. It has to be done carefully, I used a rotating pattern carefully watching for the change in color, and than working the heat in small circles, moving the heat as you see the color change back to normal. If you leave the heat too long in one place you will see the surface start to blister, so it takes a careful balance between enough heat to get it to restructure, and not so hot it loses shape and melts out.

My dad's Volvo X-Country has large charcoal plastic bumpers, fender splash guards, and side guards that turn uneven pale gray in the California sun. I spent some time trying to make it look better, trying the various chemical treatments, (none worked very well). I thought it was just permanently sun damaged. I ran across a Youtube video using a heat gun. I gave it a try and was amazed, it made all of the sun faded plastic look like new again. I even used it to "weld" some tears back together.

I do not know if it will work with the type of plastic your yard art is made of, but it works very well with the ABS plastic on most auto applications.

https://www.youtube.com/watch?v=PQs2ik1dzzE
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
Post Reply