Monroe coil over Spring/shocks for rear

[kamiphloj]

Spoke to tech rep and it is not a listed application,so it cannot be said Monroe will recommend or warranty.End style and length seem correct.Search Monroe shocks to get to catalogues and you can get a dimension chart.Compare specs wth application for Terc for yourself.I accept no responsibility for outcome.
Monroe58510.Advance said they would special order for about $75.Only price I checked.Supposedly 500 lbs total for correct app,which is probably heavier than Tercel.Dunno how that works.kamiphloj

[kamiphloj]

Looking closer at this I suspect there is not clearance for the spring OD to the body at the upper mount kamiphloj

[takza]

http://www.monroe.com/catalog_lookup/mi ... nChart.pdf

58510 S4 L1/CP3 12.750 21.375 8.625 V/R P577 & P591

MA700 S4 L1/CP3 12.750c 21.375 8.625 None P576 P1134

Here it is compared to the M700...which fits...sort of.

Since it doesn't have the fitting on it you'd have maybe a 1/2" extra clearance or an extra 1" in diameter possible vs the MA700?

right click?



http://www.monroe.com/products/mp_detai ... 0Absorbers

Should fit....somebody got the MA700s to fit with the fitting to the inside by denting the sheet metal in some at top.

I had some 750 lb rated springs (JCWhitney) on some old shocks and they didn't have too much lift.