Carburetor disassemble and assemble video

Here's some good repair guides for your Tercel :) Look here for help first!
Shanemt
Newbie
Posts: 19
Joined: Mon Jul 22, 2019 9:00 pm
My tercel:: 1983 sr5 4wd wagon

Re: Carburetor disassemble and assemble video

Post by Shanemt » Thu Aug 22, 2019 5:42 pm

The Professor wrote:
Tue Aug 20, 2019 9:17 am
Shanemt wrote:
Fri Aug 16, 2019 5:20 pm
Can anyone tell me where I can get one of these filters and the rubber tubes that connect it?
Someone already answered your question in the other thread, but it's a one-way check valve. Can be replaced by a universal part.
Thanks for the info! What about this spring that came from the back of the carb that closes the butterfly valve to the proper idle position after you let off the gas? It’s wrapped around the metal piece
A0249C9F-29B5-4F56-B8CF-8291ECF6B7FE.jpeg
You do not have the required permissions to view the files attached to this post.

Ismo
Newbie
Posts: 5
Joined: Sat Feb 15, 2020 2:46 pm
My tercel:: 87 wagon

Re: Carburetor disassemble and assemble video

Post by Ismo » Sun Mar 08, 2020 5:06 pm

Is the float level chart the same for 83 and 87?

User avatar
Petros
Highest Ranking Member
Posts: 11383
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: Carburetor disassemble and assemble video

Post by Petros » Mon Mar 09, 2020 5:48 pm

Ismo wrote:
Sun Mar 08, 2020 5:06 pm
Is the float level chart the same for 83 and 87?
yes, it should be. there were a few minor changes to the emissions system, and the jetting, but the carbs are almost identical and the floats are all the same.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)

Ismo
Newbie
Posts: 5
Joined: Sat Feb 15, 2020 2:46 pm
My tercel:: 87 wagon

Re: Carburetor disassemble and assemble video

Post by Ismo » Sun Mar 15, 2020 7:05 pm

Thanks petros it worked pretty good, car is happy.

Erikwi
Advanced Member
Posts: 95
Joined: Fri Mar 13, 2020 3:31 pm
My tercel:: 1988 stock auto
Location: lacrosse WI

Re: Carburetor disassemble and assemble video

Post by Erikwi » Sat Sep 05, 2020 1:20 pm

https://youtu.be/9UFgCyHWDns

the primary on mine looks strange
can anyone confirm that the fuel should dribble out not atomize?

Post Reply