Transmission "Assemble" is on YouTube now

Here's some good repair guides for your Tercel :) Look here for help first!
Post Reply
User avatar
xirdneh
Highest Ranking Member
Posts: 1683
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Transmission "Assemble" is on YouTube now

Post by xirdneh » Fri Feb 28, 2014 7:02 pm

Love those Tercell 4x4 wagons but they sure suffer from road noise.

User avatar
Gottolovem
Highest Ranking Member
Posts: 1635
Joined: Fri Jun 29, 2012 4:28 pm
My tercel:: 1985 SR5 with snow plow,1987 auto 1984 parts car,1987 FX-16 GTS
Location: Reno

Re: Transmission "Assemble" is on YouTube now

Post by Gottolovem » Fri Feb 28, 2014 9:29 pm

You have done a real service for all the people on this forum!!!!
THANKYOU :P

User avatar
Gottolovem
Highest Ranking Member
Posts: 1635
Joined: Fri Jun 29, 2012 4:28 pm
My tercel:: 1985 SR5 with snow plow,1987 auto 1984 parts car,1987 FX-16 GTS
Location: Reno

Re: Transmission "Assemble" is on YouTube now

Post by Gottolovem » Mon Mar 16, 2015 10:46 am

In the video I noticed you did not use gasket compound between mating surfaces were their "paper" gaskets still intact?
Seems like the surface between the main plate and main cluster cover remains kinda "sloppy" until the bell housing tightens everything up? Wouldn't that create a crappy gasket with gasket compound?

User avatar
xirdneh
Highest Ranking Member
Posts: 1683
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Re: Transmission "Assemble" is on YouTube now

Post by xirdneh » Mon Mar 16, 2015 1:43 pm

The front (intermediate) plate joins to the main case
if you look closley at the holes in the intermediate plate you will see a set of treads in some of the holes for a bolt larger in diameter than the tranny bolts that pass thru on their way to the bell housing (transaxle) housing.
when i re-use old gasket i goop it up with non-hardening gasket maker
then i bolt the two units together using those special tapped holes
after tranny is installed to transaxle i remove those bolts and install the correct ones
that method allows me to finish a tranny and store it, maintaining a good seal
Love those Tercell 4x4 wagons but they sure suffer from road noise.

User avatar
Gottolovem
Highest Ranking Member
Posts: 1635
Joined: Fri Jun 29, 2012 4:28 pm
My tercel:: 1985 SR5 with snow plow,1987 auto 1984 parts car,1987 FX-16 GTS
Location: Reno

Re: Transmission "Assemble" is on YouTube now

Post by Gottolovem » Mon Mar 16, 2015 2:35 pm

Perfect

Post Reply