Found these rubber mounts for my Tercel Air filter housing. It fits pretty good. Before I had used stacks of rubber washers and it just looked ugly. Now the air filter housing is resting very firmly and probably has less vibration.
Found them on ebay.
https://www.ebay.com/itm/4-Amp-Case-Was ... SwKclZ3svt
Air Filter Housing Supports/Mounts
-
- Member
- Posts: 40
- Joined: Fri Feb 10, 2017 5:29 pm
- My tercel:: 1983 Tercel 4x4 SR5
Air Filter Housing Supports/Mounts
You do not have the required permissions to view the files attached to this post.
- ARCHINSTL
- Goldie Forever
- Posts: 6369
- Joined: Sat Apr 30, 2005 1:52 pm
- My tercel:: Goldie is a 1986 SR5 attualmente con Weber/also owned the first T4WD in STL in late '82
- Location: Kirkwood, a 'burb of St. Louis
Re: Air Filter Housing Supports/Mounts
As reported in another thread, the PCV grommets are a perfect fit, and a heck of a lot cheaper!
Tom M.
Tom M.
T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
-
- Highest Ranking Member
- Posts: 650
- Joined: Wed May 12, 2010 6:38 pm
- My tercel:: 1987 Tercel SR5 4WD wagon
- Location: Western Washington
- Contact:
Re: Air Filter Housing Supports/Mounts
I've used a short length of small diameter rubber hose split along its length, in a pinch.
1975 Subaru SuperStar wagon
1984 Subaru Turbo-Traction wagon & hardtop
1987 Subaru RX 3-door
1987 Subaru RX Type-RA 3-door
1987 Toyota Tercel SR5 wagon
1999 Subaru Forester S
2002 Subaru WRX sedan
2019 Subaru Outback 2.5i Limited
1984 Subaru Turbo-Traction wagon & hardtop
1987 Subaru RX 3-door
1987 Subaru RX Type-RA 3-door
1987 Toyota Tercel SR5 wagon
1999 Subaru Forester S
2002 Subaru WRX sedan
2019 Subaru Outback 2.5i Limited
- Petros
- Highest Ranking Member
- Posts: 11933
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: Air Filter Housing Supports/Mounts
I use the regular gromment on the bottom, and some old valve cover washer/gasket on the top, seems to hold it well. I always have old valve cover bolt seals sitting around.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
Re: Air Filter Housing Supports/Mounts
Looks perfectly fit. We might need one for the Tercel, we'll just finish the installation of rack and tonneau covers for the kayak mount on the truck. Thank you for the link.YoYoTercel wrote: ↑Thu Apr 26, 2018 2:12 pm Found these rubber mounts for my Tercel Air filter housing. It fits pretty good. Before I had used stacks of rubber washers and it just looked ugly. Now the air filter housing is resting very firmly and probably has less vibration.
Tercel Supports.jpg
Found them on ebay.
https://www.ebay.com/itm/4-Amp-Case-Was ... SwKclZ3svt