Tranny Rebuild

How-to's and repair secrets for your 4WD can be found here. Have a question? Ask it in here!
Post Reply
xirdneh
Highest Ranking Member
Posts: 1977
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Re: Tranny Rebuild

Post by xirdneh » Mon Apr 09, 2018 8:10 am

I would not replace all bearings. The only ones that i've seen go bad are the two large front bearings and they are easy to get. If tranny is noisy while clutch pedal is up and quiets down when pedal is down i would replace inner input shaft bearing. Synchos are hard to find. I reuse the best of the used ones i can find. 2wd trannys are a good source. Also many of the gears are interchangable.
Love those Tercell 4x4 wagons but they sure suffer from road noise.

xirdneh
Highest Ranking Member
Posts: 1977
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Re: Tranny Rebuild

Post by xirdneh » Thu Apr 19, 2018 12:13 am

you can use a 83-85 tranny too
just seperate it from differential
Love those Tercell 4x4 wagons but they sure suffer from road noise.

xirdneh
Highest Ranking Member
Posts: 1977
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Re: Tranny Rebuild

Post by xirdneh » Thu Apr 19, 2018 8:18 pm

Yes same gearing except for first gear, a couple of teeth difference. You'll probably not feel any difference. I havent.
Love those Tercell 4x4 wagons but they sure suffer from road noise.

Post Reply