Hello every body- thanks for all the input on sway bar bushing ,now the million dollar question- Who sells them???
did someone say they got them from the UK?
Are ones on Cardid the right stuff?
or is Toyhead the place to go?
any tips would be much appreciated thanks to all D
Beating about the bush!
- Petros
- Highest Ranking Member
- Posts: 11933
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: Beating about the bush!
there are a few aftermarket suppliers of polyurethane bushings that have kits for the Tercel4wd, they cost less than dealer parts. I am sure they just put together some standard parts that fit other vehicles so they have a kit to sell the few remaining Tercel4wd enthusiasts. Buying just the right size bushings intend for something else, to use in the TErcel4wd, is a possibility as well. For example, the first generation MR2 has similar size drag strut bushings.
here is a supplier in the USA, I also have seen Suppliers of similar kits in Australia, it seems you should be able to find something similar in England.
http://www.suspension.com/products/toyota_tercel_1985
you might also consider making your own polyurethane bushings as well, but without the right tools, buying them would a lot less frustration and effort.
here is a supplier in the USA, I also have seen Suppliers of similar kits in Australia, it seems you should be able to find something similar in England.
http://www.suspension.com/products/toyota_tercel_1985
you might also consider making your own polyurethane bushings as well, but without the right tools, buying them would a lot less frustration and effort.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
Re: Beating about the bush!
Anybody here ever use this kit?
if it aint there, there's a good chance it won't break!
83 SR5 Silver/Blue (Snowmobile/work beater)-totaled but drivable
85 SR5 Blue
88 SR5 White (the 'good' one)-not anymore-totaled
87 fwd silver wagon a/t
87 4wd dx Cream (a/t- not anymore- now m/t)
83 SR5 Silver/Blue (Snowmobile/work beater)-totaled but drivable
85 SR5 Blue
88 SR5 White (the 'good' one)-not anymore-totaled
87 fwd silver wagon a/t
87 4wd dx Cream (a/t- not anymore- now m/t)
-
- Highest Ranking Member
- Posts: 2121
- Joined: Thu Aug 04, 2005 11:38 am
- My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
- Location: seabeck, washington, USA
Re: Beating about the bush!
conicelli toyota in pennsylvania is where i usually order them
Love those Tercell 4x4 wagons but they sure suffer from road noise.
-
- Top Notch Member
- Posts: 144
- Joined: Wed Oct 28, 2015 12:46 pm
- My tercel:: 1983 4WD SR5
- Location: Tenino, WA
Re: Beating about the bush!
I used the poly control arm to sway bar bushings shown in the link above, seemed to fit fine. I can't really speak to how they changed the ride quality because I changed out all the other front end bushings at the same time, along with some other suspension and steering stuff. I elected to go with factory rubber bushes for the rest of them, I didn't want it too stiff or for there to be more stress on the sway bar, I have it lifted a little too.
Does anybody know if any of the bushings shown in Petros' link will work for the rear control arms?
Does anybody know if any of the bushings shown in Petros' link will work for the rear control arms?
- solarlord
- Top Notch Member
- Posts: 180
- Joined: Sat Apr 16, 2011 2:39 pm
- My tercel:: 1987 4wd Swiss model
- Location: cheadle england
- Contact:
Re: Beating about the bush!
HI- thanks this wonderful ,thru your links have tracked them down in the UK. again many thank DEREK ps Petros-may i have bash at making them myself first like you suggest- have put in for planning permission in spain for tractor shed ,i didnt tell them its actually going to be a terc shed
Re: Beating about the bush!
Thanks rocketscience- think I'll give 'em a shot.
if it aint there, there's a good chance it won't break!
83 SR5 Silver/Blue (Snowmobile/work beater)-totaled but drivable
85 SR5 Blue
88 SR5 White (the 'good' one)-not anymore-totaled
87 fwd silver wagon a/t
87 4wd dx Cream (a/t- not anymore- now m/t)
83 SR5 Silver/Blue (Snowmobile/work beater)-totaled but drivable
85 SR5 Blue
88 SR5 White (the 'good' one)-not anymore-totaled
87 fwd silver wagon a/t
87 4wd dx Cream (a/t- not anymore- now m/t)