PARTING OUT- Red 86

Need a car part and don't know where to get it or how to install it. Look here!
User avatar
LittleRed4wd
Top Notch Member
Posts: 188
Joined: Sat Sep 18, 2010 11:36 am
Location: Boulder, CO

PARTING OUT- Red 86

Post by LittleRed4wd »

Car is officially gone-- Sorry for the lack of communication, see post on page 4



Image

Image

Image

Image
Last edited by LittleRed4wd on Sun May 19, 2013 10:55 am, edited 2 times in total.
86 Silver SR5 "Silver Bullet"- 3in lift, 205/75/14s, torque cam, big brakes- Sold
86 Red SR5 "Battle Wagon"- 2.5in lift, 205/75/14s, rebuilt 3ac, chalkboard hood- Totaled
86 White DX "The Gateway Drug"- All stock-Totaled
User avatar
Petros
Highest Ranking Member
Posts: 11930
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: PARTING OUT- Red 86

Post by Petros »

Sorry to hear you have to scrap the car, body looks pretty rough, what happend?

I will take the inclinometer, harness and mounting hardware. I need it for a project '86 Tercel.

looks like you have a lot of spare change rolling around under the center console.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
danzo
Highest Ranking Member
Posts: 537
Joined: Fri Dec 05, 2008 11:01 am
My tercel:: '86 SR5 6 speed
Location: The Colony, TX

Re: PARTING OUT- Red 86

Post by danzo »

Where did the frame crack? Do you know how it happened, i.e. Evel Knievel jump?
It's a scientific fact that in a twin engine aircraft, when one engine fails there is always enough power in the remaining engine to make it all the way to the crash site.
larry mcgrath
Highest Ranking Member
Posts: 606
Joined: Mon Aug 16, 2010 3:23 pm
My tercel:: 83 tercel v20 B/T (The ROCKET)98 toyota t100
Location: Wilds of Montana

Re: PARTING OUT- Red 86

Post by larry mcgrath »

I'll take the plastic around the tilt steering column , the pix look like it has a tilt steering column?(the two pieces around the ignition switch and the piece that is under the column that covers the left speaker ) pm me for shipping info thanks Larry.
4doorVIP
Top Notch Member
Posts: 289
Joined: Sun Aug 29, 2010 9:59 am
My tercel:: 1988 SR5 Wagon
Location: Vancouver Island

Re: PARTING OUT- Red 86

Post by 4doorVIP »

hey man ill take that inclinometer from ya for $25
send me a pm with your paypal
2JZGTE-powered Tercel SR5
User avatar
dlb
Highest Ranking Member
Posts: 7305
Joined: Mon Jul 06, 2009 9:03 pm
My tercel:: '87 sr5, '83 dlx parts car
Location: bc, canada

Re: PARTING OUT- Red 86

Post by dlb »

littlered4wd, what are the dash gauges out of? i don't want them, i've just been curious for a while. it looks like DLX gauges but with a white background. very odd, especially since the car appears to be an SR5.

how much for the roof racks? not sure if i want them yet but figured i'd ask.
User avatar
LittleRed4wd
Top Notch Member
Posts: 188
Joined: Sat Sep 18, 2010 11:36 am
Location: Boulder, CO

Re: PARTING OUT- Red 86

Post by LittleRed4wd »

Inclinometer is spoken for.

Larry- $15 plus shipping works for the 3 trim pieces, I'll check out pricing tomorrow.

DLB- Its a DX cluster. I got bored and made my own white face gauges with a sharpie and a typewriter. Pretty ghetto but that's the point- The temp gauge is labeled with "burrr" on the cold side and "oh $#!%" on the hot. 88 mph is labeled "time travel"- ect ect. It makes people laugh haha

I'll take $20 for the rack, not sure the best way to ship it up to ya but we can figure it out if you decide to take it
86 Silver SR5 "Silver Bullet"- 3in lift, 205/75/14s, torque cam, big brakes- Sold
86 Red SR5 "Battle Wagon"- 2.5in lift, 205/75/14s, rebuilt 3ac, chalkboard hood- Totaled
86 White DX "The Gateway Drug"- All stock-Totaled
User avatar
dlb
Highest Ranking Member
Posts: 7305
Joined: Mon Jul 06, 2009 9:03 pm
My tercel:: '87 sr5, '83 dlx parts car
Location: bc, canada

Re: PARTING OUT- Red 86

Post by dlb »

you should post a pic of that cluster. it looks pretty cool.

i'll let you know about the rack, still not sure. no projects on the horizon so i really shouldn't hoard but it's hard to resist...

i am very, very excited for larry to finally get his tilt steering trim!
larry mcgrath
Highest Ranking Member
Posts: 606
Joined: Mon Aug 16, 2010 3:23 pm
My tercel:: 83 tercel v20 B/T (The ROCKET)98 toyota t100
Location: Wilds of Montana

Re: PARTING OUT- Red 86

Post by larry mcgrath »

I'll take them . Im with dlb lets see some pix and pix of your frame thanks again Larry
North of 64
Top Notch Member
Posts: 237
Joined: Wed Feb 29, 2012 2:04 pm
My tercel:: "Bones" 87 SR5 4wd wagon
Location: Dawson City, Yukon

Re: PARTING OUT- Red 86

Post by North of 64 »

Hey, how much for all of the rubber door strips? Especially need the section under the fuel filler.
Thanks
4doorVIP
Top Notch Member
Posts: 289
Joined: Sun Aug 29, 2010 9:59 am
My tercel:: 1988 SR5 Wagon
Location: Vancouver Island

Re: PARTING OUT- Red 86

Post by 4doorVIP »

how about some door handles, are they for sale?
roof rack?
inclinometer sold?
2JZGTE-powered Tercel SR5
User avatar
dlb
Highest Ranking Member
Posts: 7305
Joined: Mon Jul 06, 2009 9:03 pm
My tercel:: '87 sr5, '83 dlx parts car
Location: bc, canada

Re: PARTING OUT- Red 86

Post by dlb »

4doorVIP wrote:how about some door handles, are they for sale?
roof rack?
inclinometer sold?
i think he said the roof rack was $20. i was thinking about it but would be happy if you went for it to save me from the temptation. you could even come over to use my riv-nut installer when you put them on!
User avatar
LittleRed4wd
Top Notch Member
Posts: 188
Joined: Sat Sep 18, 2010 11:36 am
Location: Boulder, CO

Re: PARTING OUT- Red 86

Post by LittleRed4wd »

North of 64- $20 for all the rub strips. I actually have a set off of an 83 (slightly different font) that are in better shape than the ones on this car.

4door- Inner or outer handles? I have them all. Inclo is sold, and if DLB passes on the rack it's yours for $20
86 Silver SR5 "Silver Bullet"- 3in lift, 205/75/14s, torque cam, big brakes- Sold
86 Red SR5 "Battle Wagon"- 2.5in lift, 205/75/14s, rebuilt 3ac, chalkboard hood- Totaled
86 White DX "The Gateway Drug"- All stock-Totaled
Jarf
Top Notch Member
Posts: 354
Joined: Sat Jun 21, 2008 9:20 pm
My tercel:: Currently without
Location: Ontario

Re: PARTING OUT- Red 86

Post by Jarf »

I'd be interested in both fr fenders.
Am allergic to rust but dents don't bother me so much.
Shipping might be a problem, would have to figure out how to package them so they arrive safe.
Let me know if you want to deal with packaging/shipping and we can work something out.
Thanks
Jarf
4doorVIP
Top Notch Member
Posts: 289
Joined: Sun Aug 29, 2010 9:59 am
My tercel:: 1988 SR5 Wagon
Location: Vancouver Island

Re: PARTING OUT- Red 86

Post by 4doorVIP »

hey man

im looking for exterior door handles
also how much for both tail lights?
if your interior is brown im looking for a dome light
you dont happen to have the mr2 brake master do you?
2JZGTE-powered Tercel SR5
Post Reply