PARTING OUT- Red 86
- LittleRed4wd
- Top Notch Member
- Posts: 188
- Joined: Sat Sep 18, 2010 11:36 am
- Location: Boulder, CO
PARTING OUT- Red 86
Last edited by LittleRed4wd on Sun May 19, 2013 10:55 am, edited 2 times in total.
86 Silver SR5 "Silver Bullet"- 3in lift, 205/75/14s, torque cam, big brakes- Sold
86 Red SR5 "Battle Wagon"- 2.5in lift, 205/75/14s, rebuilt 3ac, chalkboard hood- Totaled
86 White DX "The Gateway Drug"- All stock-Totaled
86 Red SR5 "Battle Wagon"- 2.5in lift, 205/75/14s, rebuilt 3ac, chalkboard hood- Totaled
86 White DX "The Gateway Drug"- All stock-Totaled
- Petros
- Highest Ranking Member
- Posts: 11933
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: PARTING OUT- Red 86
Sorry to hear you have to scrap the car, body looks pretty rough, what happend?
I will take the inclinometer, harness and mounting hardware. I need it for a project '86 Tercel.
looks like you have a lot of spare change rolling around under the center console.
I will take the inclinometer, harness and mounting hardware. I need it for a project '86 Tercel.
looks like you have a lot of spare change rolling around under the center console.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
-
- Highest Ranking Member
- Posts: 537
- Joined: Fri Dec 05, 2008 11:01 am
- My tercel:: '86 SR5 6 speed
- Location: The Colony, TX
Re: PARTING OUT- Red 86
Where did the frame crack? Do you know how it happened, i.e. Evel Knievel jump?
It's a scientific fact that in a twin engine aircraft, when one engine fails there is always enough power in the remaining engine to make it all the way to the crash site.
-
- Highest Ranking Member
- Posts: 609
- Joined: Mon Aug 16, 2010 3:23 pm
- My tercel:: 83 tercel v20 B/T (The ROCKET)98 toyota t100
- Location: Wilds of Montana
Re: PARTING OUT- Red 86
I'll take the plastic around the tilt steering column , the pix look like it has a tilt steering column?(the two pieces around the ignition switch and the piece that is under the column that covers the left speaker ) pm me for shipping info thanks Larry.
-
- Top Notch Member
- Posts: 289
- Joined: Sun Aug 29, 2010 9:59 am
- My tercel:: 1988 SR5 Wagon
- Location: Vancouver Island
Re: PARTING OUT- Red 86
hey man ill take that inclinometer from ya for $25
send me a pm with your paypal
send me a pm with your paypal
2JZGTE-powered Tercel SR5
- dlb
- Highest Ranking Member
- Posts: 7321
- Joined: Mon Jul 06, 2009 9:03 pm
- My tercel:: '87 sr5, '83 dlx parts car
- Location: bc, canada
Re: PARTING OUT- Red 86
littlered4wd, what are the dash gauges out of? i don't want them, i've just been curious for a while. it looks like DLX gauges but with a white background. very odd, especially since the car appears to be an SR5.
how much for the roof racks? not sure if i want them yet but figured i'd ask.
how much for the roof racks? not sure if i want them yet but figured i'd ask.
- LittleRed4wd
- Top Notch Member
- Posts: 188
- Joined: Sat Sep 18, 2010 11:36 am
- Location: Boulder, CO
Re: PARTING OUT- Red 86
Inclinometer is spoken for.
Larry- $15 plus shipping works for the 3 trim pieces, I'll check out pricing tomorrow.
DLB- Its a DX cluster. I got bored and made my own white face gauges with a sharpie and a typewriter. Pretty ghetto but that's the point- The temp gauge is labeled with "burrr" on the cold side and "oh $#!%" on the hot. 88 mph is labeled "time travel"- ect ect. It makes people laugh haha
I'll take $20 for the rack, not sure the best way to ship it up to ya but we can figure it out if you decide to take it
Larry- $15 plus shipping works for the 3 trim pieces, I'll check out pricing tomorrow.
DLB- Its a DX cluster. I got bored and made my own white face gauges with a sharpie and a typewriter. Pretty ghetto but that's the point- The temp gauge is labeled with "burrr" on the cold side and "oh $#!%" on the hot. 88 mph is labeled "time travel"- ect ect. It makes people laugh haha
I'll take $20 for the rack, not sure the best way to ship it up to ya but we can figure it out if you decide to take it
86 Silver SR5 "Silver Bullet"- 3in lift, 205/75/14s, torque cam, big brakes- Sold
86 Red SR5 "Battle Wagon"- 2.5in lift, 205/75/14s, rebuilt 3ac, chalkboard hood- Totaled
86 White DX "The Gateway Drug"- All stock-Totaled
86 Red SR5 "Battle Wagon"- 2.5in lift, 205/75/14s, rebuilt 3ac, chalkboard hood- Totaled
86 White DX "The Gateway Drug"- All stock-Totaled
- dlb
- Highest Ranking Member
- Posts: 7321
- Joined: Mon Jul 06, 2009 9:03 pm
- My tercel:: '87 sr5, '83 dlx parts car
- Location: bc, canada
Re: PARTING OUT- Red 86
you should post a pic of that cluster. it looks pretty cool.
i'll let you know about the rack, still not sure. no projects on the horizon so i really shouldn't hoard but it's hard to resist...
i am very, very excited for larry to finally get his tilt steering trim!
i'll let you know about the rack, still not sure. no projects on the horizon so i really shouldn't hoard but it's hard to resist...
i am very, very excited for larry to finally get his tilt steering trim!
-
- Highest Ranking Member
- Posts: 609
- Joined: Mon Aug 16, 2010 3:23 pm
- My tercel:: 83 tercel v20 B/T (The ROCKET)98 toyota t100
- Location: Wilds of Montana
Re: PARTING OUT- Red 86
I'll take them . Im with dlb lets see some pix and pix of your frame thanks again Larry
-
- Top Notch Member
- Posts: 237
- Joined: Wed Feb 29, 2012 2:04 pm
- My tercel:: "Bones" 87 SR5 4wd wagon
- Location: Dawson City, Yukon
Re: PARTING OUT- Red 86
Hey, how much for all of the rubber door strips? Especially need the section under the fuel filler.
Thanks
Thanks
-
- Top Notch Member
- Posts: 289
- Joined: Sun Aug 29, 2010 9:59 am
- My tercel:: 1988 SR5 Wagon
- Location: Vancouver Island
Re: PARTING OUT- Red 86
how about some door handles, are they for sale?
roof rack?
inclinometer sold?
roof rack?
inclinometer sold?
2JZGTE-powered Tercel SR5
- dlb
- Highest Ranking Member
- Posts: 7321
- Joined: Mon Jul 06, 2009 9:03 pm
- My tercel:: '87 sr5, '83 dlx parts car
- Location: bc, canada
Re: PARTING OUT- Red 86
i think he said the roof rack was $20. i was thinking about it but would be happy if you went for it to save me from the temptation. you could even come over to use my riv-nut installer when you put them on!4doorVIP wrote:how about some door handles, are they for sale?
roof rack?
inclinometer sold?
- LittleRed4wd
- Top Notch Member
- Posts: 188
- Joined: Sat Sep 18, 2010 11:36 am
- Location: Boulder, CO
Re: PARTING OUT- Red 86
North of 64- $20 for all the rub strips. I actually have a set off of an 83 (slightly different font) that are in better shape than the ones on this car.
4door- Inner or outer handles? I have them all. Inclo is sold, and if DLB passes on the rack it's yours for $20
4door- Inner or outer handles? I have them all. Inclo is sold, and if DLB passes on the rack it's yours for $20
86 Silver SR5 "Silver Bullet"- 3in lift, 205/75/14s, torque cam, big brakes- Sold
86 Red SR5 "Battle Wagon"- 2.5in lift, 205/75/14s, rebuilt 3ac, chalkboard hood- Totaled
86 White DX "The Gateway Drug"- All stock-Totaled
86 Red SR5 "Battle Wagon"- 2.5in lift, 205/75/14s, rebuilt 3ac, chalkboard hood- Totaled
86 White DX "The Gateway Drug"- All stock-Totaled
-
- Top Notch Member
- Posts: 354
- Joined: Sat Jun 21, 2008 9:20 pm
- My tercel:: Currently without
- Location: Ontario
Re: PARTING OUT- Red 86
I'd be interested in both fr fenders.
Am allergic to rust but dents don't bother me so much.
Shipping might be a problem, would have to figure out how to package them so they arrive safe.
Let me know if you want to deal with packaging/shipping and we can work something out.
Thanks
Jarf
Am allergic to rust but dents don't bother me so much.
Shipping might be a problem, would have to figure out how to package them so they arrive safe.
Let me know if you want to deal with packaging/shipping and we can work something out.
Thanks
Jarf
-
- Top Notch Member
- Posts: 289
- Joined: Sun Aug 29, 2010 9:59 am
- My tercel:: 1988 SR5 Wagon
- Location: Vancouver Island
Re: PARTING OUT- Red 86
hey man
im looking for exterior door handles
also how much for both tail lights?
if your interior is brown im looking for a dome light
you dont happen to have the mr2 brake master do you?
im looking for exterior door handles
also how much for both tail lights?
if your interior is brown im looking for a dome light
you dont happen to have the mr2 brake master do you?
2JZGTE-powered Tercel SR5