'84 Tercel 2wd wagon free parts

Need a car part and don't know where to get it or how to install it. Look here!
ernieclerihew
Newbie
Posts: 8
Joined: Thu Oct 15, 2020 7:25 pm
My tercel:: 1984 DLX wagon

'84 Tercel 2wd wagon free parts

Post by ernieclerihew »

This car still runs well but has rusty floors and is uninspectable. I have many carburetors, distributors, fuel pumps, engine parts, 2wd transmission. Many good trim parts. Good hood, no rust . Deck lid good,surface rust. Tail lights very good. 4 white aluminum factory wheels, at least 8 steel wheels, 5 stainless trim rings - none perfect. Factory AC, Period correct roof rack, gray interior not bad. You pay shipping and handling only. The car and I are both in Vermont, but the car came from Florida 5 years ago. What do you need?
User avatar
Petros
Highest Ranking Member
Posts: 11930
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: '84 Tercel 2wd wagon free parts

Post by Petros »

do you have the "pizza cutter" type Tercel factory allow wheels? I have a project Tercel that has two of the factory alloy wheels, the rest of the wheels are mismatched steel wheels. I can use two of them. I need to check out if I need anything else.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
53Zachary
Newbie
Posts: 2
Joined: Sun Nov 01, 2020 6:30 am
My tercel:: 1986 4wd wagon

Re: '84 Tercel 2wd wagon free parts

Post by 53Zachary »

I'm interested in the roof rack, (especially if it is a gutter mount), 1 carb, and the cover for the back area if available. Thanks
The Professor
Highest Ranking Member
Posts: 650
Joined: Wed May 12, 2010 6:38 pm
My tercel:: 1987 Tercel SR5 4WD wagon
Location: Western Washington
Contact:

Re: '84 Tercel 2wd wagon free parts

Post by The Professor »

Does the car have adjustable intermittent wipers or cruise control?
1975 Subaru SuperStar wagon
1984 Subaru Turbo-Traction wagon & hardtop
1987 Subaru RX 3-door
1987 Subaru RX Type-RA 3-door
1987 Toyota Tercel SR5 wagon
1999 Subaru Forester S
2002 Subaru WRX sedan
2019 Subaru Outback 2.5i Limited
ernieclerihew
Newbie
Posts: 8
Joined: Thu Oct 15, 2020 7:25 pm
My tercel:: 1984 DLX wagon

Re: '84 Tercel 2wd wagon free parts

Post by ernieclerihew »

Hi Pedro,

I guess I don't know what "pizza cutter wheels" are. I'll send you a picture.

Ernie
ernieclerihew
Newbie
Posts: 8
Joined: Thu Oct 15, 2020 7:25 pm
My tercel:: 1984 DLX wagon

Re: '84 Tercel 2wd wagon free parts

Post by ernieclerihew »

Hi Zachary,

The roof rack is held on the roof with sheet metal screws. Where are you located?

Ernie
ernieclerihew
Newbie
Posts: 8
Joined: Thu Oct 15, 2020 7:25 pm
My tercel:: 1984 DLX wagon

Re: '84 Tercel 2wd wagon free parts

Post by ernieclerihew »

Hi Professor,

Sorry to say my car has neither intermittent wipers nor cruise control.

Ernie
86tercelOG
Newbie
Posts: 8
Joined: Mon Sep 14, 2020 8:03 pm
My tercel:: 1986 Toyota Tercel SR5. Completely stock

Re: '84 Tercel 2wd wagon free parts

Post by 86tercelOG »

Where are you located? I’m interested in the hood!
ernieclerihew
Newbie
Posts: 8
Joined: Thu Oct 15, 2020 7:25 pm
My tercel:: 1984 DLX wagon

Re: '84 Tercel 2wd wagon free parts

Post by ernieclerihew »

Hi 86tercelOG,

I'm located in Pittsford, Vermont.

Ernie
53Zachary
Newbie
Posts: 2
Joined: Sun Nov 01, 2020 6:30 am
My tercel:: 1986 4wd wagon

Re: '84 Tercel 2wd wagon free parts

Post by 53Zachary »

ernieclerihew wrote: Thu Dec 03, 2020 1:28 pm Hi Zachary,

The roof rack is held on the roof with sheet metal screws. Where are you located?

Ernie
I'm in the 60041 zip code. I'm kind of chicken to drill through my roof though. I was hoping it had the gutter mounts.
User avatar
Petros
Highest Ranking Member
Posts: 11930
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: '84 Tercel 2wd wagon free parts

Post by Petros »

ernieclerihew wrote: Thu Dec 03, 2020 1:16 pm Hi Pedro,

I guess I don't know what "pizza cutter wheels" are. I'll send you a picture.

Ernie
that is the term to describ the early factory optional alloy. I am not keen on them, but many like the nostalgic look, and one of my project cars only came with two, plus the one in the spare well. so I need at least one, but I would consider taking more. I also need the center cap. attached is the picture of what I am looking for. they should weight about 24 lbs each, perhaps less.
You do not have the required permissions to view the files attached to this post.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
ernieclerihew
Newbie
Posts: 8
Joined: Thu Oct 15, 2020 7:25 pm
My tercel:: 1984 DLX wagon

Re: '84 Tercel 2wd wagon free parts

Post by ernieclerihew »

Hi Pedro,
That is exactly what I have, painted white. I also have 4 center caps. These came from my daughter's 1983 4wd Tercel, a long-gone victim of rust, but I saved the wheels. Like I said, I'm new to the forum - how do we proceed from here and how many wheels do you want?
User avatar
Petros
Highest Ranking Member
Posts: 11930
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: '84 Tercel 2wd wagon free parts

Post by Petros »

ernieclerihew wrote: Sat Dec 05, 2020 11:27 am Hi Pedro,
That is exactly what I have, painted white. I also have 4 center caps. ... how do we proceed from here and how many wheels do you want?
if they all match, and not too beat up, I suppose I can take the whole set. we can go to the Private massage part of this forum, and work out shipping, costs etc. or you can send me an email at petros98223@gmail.com.

easiest would be to find heavy card board boxes that they fit in (or cut larger boxes down to fit), included some extra layers for padding, and than weigh them to find out how much they cost to ship. likely USPS would be cheapest way if the box is not too large for them. it would likely be best to just remove any tires they might have and discard them if they are older than perhaps 4-5 years, old tires decompose and usually are not reliable. you would have to go to a tire shop to have them removed with their tire machine.

Before you spend any money, let me know how much shipping and costs for your troubles. to make sure sending wheels across the country is worth the cost.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
User avatar
Mattel
Highest Ranking Member
Posts: 1788
Joined: Tue Aug 17, 2004 12:11 am
My tercel:: 1988 Corolla 4wd Wagon (AKA Corolla All-trac) 5speed, AC, Power Sunroof, Windows, Mirrors, Steering, Locking, Diff Lock, 14" Corolla SX Alloys with Silica Hankook Tyres, 4afe, King Springs, Upgraded Headlights, Full Synth oils, 210,000kms
Location: Melbourne, Australia

Re: '84 Tercel 2wd wagon free parts

Post by Mattel »

I believe bryan thompson might have 3d printed centercaps. might be good getting the file off him.
Previous: 83 Tercel SR5 4wd, 84 Tercel SR5 4wd
88 Corolla 4wd Wagon 5speed, All power options, Fact Sunroof, Diff Lock, 14" SX Alloys, Hankook Tyres, 4afe, King Springs, Upgraded Headlights, Full Synth oils, Tow Bar, 210,000kms
proxin76
Newbie
Posts: 7
Joined: Sat Apr 18, 2020 11:14 am
My tercel:: 1985 4WD SR5

Re: '84 Tercel 2wd wagon free parts

Post by proxin76 »

Still offering, Ernie? I'm interested in that roof rack, but I wonder if you could supply pictures before I foot the bill for shipping to CA.

I'm also definitely interested in the driver front turn signal lens, the badge that goes on the tailgate, and I wonder if you have any transmission or engine mounts in your loose parts bin.
Post Reply