water bypass tube o rings

Need a car part and don't know where to get it or how to install it. Look here!
Post Reply
toyomonkey611
Member
Posts: 32
Joined: Wed Aug 14, 2013 8:18 pm
My tercel:: 1985 4x4 sr5 wagon

water bypass tube o rings

Post by toyomonkey611 »

hey i cant find two O rings for the water bypass tube (below the water outlet and above the water pump) anyone able to let some of those go?
xirdneh
Highest Ranking Member
Posts: 2124
Joined: Thu Aug 04, 2005 11:38 am
My tercel:: 87 tercel 4x4 wagon w/reringed engine, 83 tercel 4x4 wagon w/salvaged engine and 4.1 Diff's
Location: seabeck, washington, USA

Re: water bypass tube o rings

Post by xirdneh »

you can get them at auto parts store. they usually have a tray with different sizes
pick one that slides over snug
if you take the pipe and the housing with you
find one that goes over pipe snugg
and try inserting into housing
should go in snug
the diameter of the o ring material varies 3/32" , 1/8" etc
too big dia and it will not go in housing
Love those Tercell 4x4 wagons but they sure suffer from road noise.
User avatar
irowiki
Highest Ranking Member
Posts: 3469
Joined: Tue Apr 02, 2013 10:02 am
Location: Farmington, NM

Re: water bypass tube o rings

Post by irowiki »

96711-24013 is the toyota part number

http://www.midatlantictoyotaparts.com/o ... 9671124013
Former Tercel Enthusiast (not a practical family car anymore but they still have a place in my heart)

Site administrator, if something is broken, PM me!

87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 197k
05 Avalon, 199k
c_j
Top Notch Member
Posts: 231
Joined: Mon Dec 06, 2010 3:06 pm
My tercel:: T4WD#4: '86 SR5 6-speed, original Barto lift & steel bumpers & winch, also 95Amp alternator
Location: Vancouver Island, BC, Canada

Re: water bypass tube o rings

Post by c_j »

Too late for the OP, but I used regular inch size o-rings #112 once before and again just last week when the head gasket kit I got only came with 1 o-ring. The #112 o-rings are slightly fatter and fit nicely. Use syl-glyde or similar product to lubricate them when installing.
Post Reply