so im starting a new project

General discussion about our beloved Tercel 4WD cars
shogun
Highest Ranking Member
Posts: 784
Joined: Thu Mar 31, 2005 1:48 pm

Re: so im starting a new project

Post by shogun » Fri Apr 15, 2011 7:40 pm

im still waiting on my friend for the crank, if he doesnt come through i´m knife edging one stock one and send it to be balanced

teaser of todays work
Image
tercel 4wd custom suspension, under drive pulley, vented brakes, cold air intake, and plenty more to come

shogun
Highest Ranking Member
Posts: 784
Joined: Thu Mar 31, 2005 1:48 pm

Re: so im starting a new project

Post by shogun » Fri Apr 15, 2011 8:10 pm

Image

3ascv head you can se the actuator in the back and the valves in front of the springs

Image

here you kinda see the valve in the intake port

now lets get into buissness

Image

side by side 3ac and 4ag

Image

inner workings

Image

the difference between the pumps

Image

a little bit of porting, just to get better flow of oil

Image

the exit to the block, it had a sharp turn so i radiused it and made the change a lot smoother
tercel 4wd custom suspension, under drive pulley, vented brakes, cold air intake, and plenty more to come

shogun
Highest Ranking Member
Posts: 784
Joined: Thu Mar 31, 2005 1:48 pm

Re: so im starting a new project

Post by shogun » Wed Jul 06, 2011 10:23 pm

well i have a little update not much but its a begining, and Carlos(tercel4wdrules) youll be getting a present soon

Image
i did the begining of the machining in the lathe and started to do some modeling

Image

here is the begining of the machining program, font was killing me so had to change it twice!

Image

after a little convincing mastercam said ok and gave me this simulation

Image

halfway through the drilling process

Image

the begining of the lettering

Image

finally the machining is done just the keyway is missing but that is just a half hour job

still looking for pistons and trying to decide if i knife edge the crank
tercel 4wd custom suspension, under drive pulley, vented brakes, cold air intake, and plenty more to come

shogun
Highest Ranking Member
Posts: 784
Joined: Thu Mar 31, 2005 1:48 pm

Re: so im starting a new project

Post by shogun » Wed Jul 06, 2011 10:26 pm

ohh btw the stock pulley weighs 1489 grams, this one has 304 and i still can machine off like 5 mm off and the keyway, so im confident it could go mid 200 grams, since its for the street im not taking any more weight, the one i use for racing is underdrive and weighs close to 100 grams
tercel 4wd custom suspension, under drive pulley, vented brakes, cold air intake, and plenty more to come

User avatar
dlb
Highest Ranking Member
Posts: 6518
Joined: Mon Jul 06, 2009 9:03 pm
My tercel:: none currently, 7 previous
Location: shawnigan lake, bc, canada

Re: so im starting a new project

Post by dlb » Thu Jul 07, 2011 12:46 am

intense!

User avatar
ARCHINSTL
Goldie Forever
Posts: 6369
Joined: Sat Apr 30, 2005 1:52 pm
My tercel:: Goldie is a 1986 SR5 attualmente con Weber/also owned the first T4WD in STL in late '82
Location: Kirkwood, a 'burb of St. Louis

Re: so im starting a new project

Post by ARCHINSTL » Thu Jul 07, 2011 12:57 am

WOW - Pretty!

Tom M.
T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain

shogun
Highest Ranking Member
Posts: 784
Joined: Thu Mar 31, 2005 1:48 pm

Re: so im starting a new project

Post by shogun » Fri Jul 15, 2011 11:21 am

quick update, started using my sandblaster and did my valve cover, vht wrinke black its the wavy cover for the 3asu head im puting in

Image
tercel 4wd custom suspension, under drive pulley, vented brakes, cold air intake, and plenty more to come

Post Reply