Tercel4wd.com merchandise?

[Neu]

Uh..why am i under xl? I'm a little hurt man.

Other then the shirt the only thing I wanted was the inside back/side window stickers.

[SynthDesign]

Well I'm an XL, but there's certainly no rush on this.

I just added it cause I thought you were an Xl . Fine update your own

[Neu]

haha, i forgot that i posted that.

[shogun]

i want any merchandise you have, what is the total cost and can i paypal you, shipping is to 33166, my pobox in miami, will be the only one that has that in guatemala

[SynthDesign]

To everyone waiting. Sorry but I had previously dropped the ball big time. I was overwhelmed with projects, health issues, and work buy-outs.
I'm making a full effort to get prices and another production sample of the die-cut window stickers. I for the life of me can't find the one I took home from DeCalCo, so sorry no sample yet.

Synth

[Neu]

Hey synth, really it's not a HUGE issue. Just finish your taxes and stuff first.

[shogun]

just holler when they are available

[SynthDesign]

IMG_0099.JPG

1st sample of T's
Die cuts in the next day or so.
Prices to follow.

[Neu]

You look pretty happy to be posing for the photo. Hands in pockets and everything.

[SynthDesign]

I'm cool like that. I was tryin to get a cute girl to wear it for the pic, but no dice.

[Neu]

when you send me one, i'll try to get my girlfriend to wear it..i doubt she'll go for it though. lol.

[blade]

so do we have stickers and if so can you tell me the price and the sizes??

[SynthDesign]

Die cut Stickers are in!! Shirts and bumper stickers next week.

IMG_0086.JPG

Better pics to follow but just wanted to get this posted.

Prices are as follows:

large 2 color reversed(interior application) long logo die cuts 27.8x3” $17
medium 2 color reversed(interior application) long logo die cuts 18.5x2” $13
short 2 color reversed(interior application) long logo die cuts 12x1.25 $8
large 2 color reversed(interior application) rectangle logo die cuts 13x4” $15
large 2 color standard(exterior application) rectangle logo die cuts 13x4” $15
medium 2 color reversed(interior application) rectangle logo die cuts 8.1x2.5” $8
medium 2 color standard(exterior application) rectangle logo die cuts 8.1x2.5” $8
small 2 color reversed(interior application) rectangle logo die cuts 4.8x1.5” $4 Repriced to $3
small 2 color standard(exterior application) rectangle logo die cuts 4.8x1.5” $4 Repriced to $3

I've yet to figure out what shipping will cost and how to handle payment. USPS should be less than a few dollars for just stickers.
I should have one of those horrific paypal account setup in the next day or two if that helps.( I really hate them with a passion!!!!!!)


I will update as time allows. Sorry again for the delay. If feels like this project is taking forever, but progress!

PM me for orders, or post questions here so all can read.

[SynthDesign]

Die-cut sticker application.
Step 1:
Your sticker will arrive with a protective transfer tape front and a paper backing.
Step 2:
Decide on the best location for your sticker. For best results make sure to clean your desired sticker location. This will insure that your decal will adhere to the desired surface easily, and last for many years to come.
Step 3:
Peel the paper backing away from the sticker slowly. Be sure that the sticker stays attached to the transfer tape.
Step 4:
Carefully position your sticker on the desired surface. Once, the decal sticks you will not be able to reposition the sticker without destroying it.
Step 5:
Use a hard edged, soft flexible object like a library card or credit card to rub over the entire surface of the sticker. For best results start in center and rub toward one direction, return to the center and rub in the other direction. Be careful to make sure the sticker is fully adhered to the surface, and remove any air bubbles.
Step 6:
Slowly remove the transfer tape. It's easier to pull in a downward angular fashion. Make sure that the entire decal is removed from the transfer tape, and remains of the surface.
Step 7:
The sticker is now fully applied. Check the sticker for any air bubbles. The bubbles can be removed by working them to the edge of the sticker. If it's too difficult to move the air bubble try making a small pin hole in the bubble. This will allow the air to leave, and you won't see the pin hole once the air has leave. That's it! Your sticker should last you for many year to come. It will survive nicely through rain, sleet, snow and gentle washings. You can remove the sticker from glass surfaces with a razor blade.

[Neu]

My car looks amazing with tercel4wd.com on the back, I'll get a picture tomorrow. It's great looking.