Tranny smash

Typrus · Post by **Typrus** » Sun Apr 15, 2007 9:39 pm

enjoy- 87 Tranny guts. Single pic, might be small... If so I'll try for a bigger one.

mailman · Post by **mailman** » Sun Apr 15, 2007 9:44 pm

Typrus, so what are you going to do. Are you going to rebuild or replace. is the ring and pinion good in the front differential I'm in need of them. the mailman

Typrus · Post by **Typrus** » Sun Apr 15, 2007 9:49 pm

Replace. The 86 (Blue) is sacrificing a tranny. I have yet to look at the front half. If its good we might be able to work something out. 4.10 is what you need, yes?

mailman · Post by **mailman** » Sun Apr 15, 2007 10:01 pm

yep. Mine is toast. 86 and 87 is the same. so i am told. any parts you are in need of? The Mailman

Typrus · Post by **Typrus** » Sun Apr 15, 2007 10:04 pm

I dunno.
I'm going to have to look once I get a chance. Which could be a while with me focusing on the 85. But I will try to get it off and looked at for you.

mailman · Post by **mailman** » Sun Apr 15, 2007 10:17 pm

Typrus, no hurry. its been setting for a year and a half. start it every week. but chatters and cracks when you move it. So it will wait till you get up and running. the mailman

2manytoys4menow · Post by **2manytoys4menow** » Sun Apr 15, 2007 10:28 pm

ouch ! That doesn't look to good . I still have the old trans out of my 84 terc and it didn't look half as bad as yours . What did you do to it

. I have a good 3:73 front ring and pinion and some good gears left . I gave a member some of the shift forks for his dads out of country tercel .

takza · Post by **takza** » Mon Apr 16, 2007 2:45 am

You are rough on gears Typrus. I never got around to splitting mine to see where the metal powder was coming from...might have been those gears?

Maybe a flush and Mobil synth ATF/Lubegard for that new auto?

Typrus · Post by **Typrus** » Mon Apr 16, 2007 6:31 am

I never drove this car just so you know.

The bearing gave out on the middle one, causing the input shaft to be demolished (spins at engine speed) and the counter and main shafts to get chewed up.