A little progress report!

General discussion about our beloved Tercel 4WD cars
Post Reply
User avatar
Kozuto_98
Top Notch Member
Posts: 229
Joined: Fri Jun 26, 2020 3:45 pm
My tercel:: 1987 SR5 Wagon
Location: Nova Scotia, Canada

A little progress report!

Post by Kozuto_98 »

After about 2 weeks of work and many 24's I've got my 1987 SR5 stripped down, the doors fixed up, and the fenders fixed up.

The front doors both needed a patch welded on and some filler to make them flush again. Water managed to get under the double-sided tape holding the side trim on.
Thankfully the rear doors didn't have any rust, so just some sanding and minor dent correction cleaned them up nice!
20200613_103954.jpg
door.png
I'm not entirely happy with how the driver side fender turned out as about 50% of it had to be made from scratch, so hopefully I'll come across a better one soon!

The main body of the wagon also has some rusty parts that will need to be fixed too.
Under both the front driver and passenger footwells are some places that need work, The rust made it's way through the rear quarters and made some smaller holes under where the rear seat would sit, the elbow pieces that come off the main frame are both in need of work, the rear quarter panels also have some rust, and both side rockers will need to be chopped off as it's both very rusty and too thin of metal to weld.
20200628_141951.jpg
20200628_141906.jpg
20200628_141920.jpg
20200628_142000-1.jpg
20200628_142016.jpg
20200628_142147.jpg
20200628_142025.jpg
20200628_142221.jpg
20200628_142507.jpg
I also managed to come across an original wagon steering wheel to replace the Lexus one the previous owner put on.
All the sound deadening has been taken out and I plan on putting in some fresh dynamat after all the main body work is done.
I also have the new rockers ready to be welded on, I got a local sheet metal shop to bend some 20 gauge up to fit the body.

I still have a lot of work ahead of me but hopefully it all pays off!
You do not have the required permissions to view the files attached to this post.
1987 Tercel Wagon SR5 4WD
1998 Honda Accord Coupe V6 J35 swap
1997 Acura CL (Sold for 4A-GE money)
RIP 2016 Civic (wrist pin recall)
Erikwi
Top Notch Member
Posts: 114
Joined: Fri Mar 13, 2020 3:31 pm
My tercel:: 1988 stock auto
Location: lacrosse WI

Re: A little progress report!

Post by Erikwi »

lexus steering wheel?
your canadian cars always are so rough!
hope it works out. i painted my roof today.
User avatar
Kozuto_98
Top Notch Member
Posts: 229
Joined: Fri Jun 26, 2020 3:45 pm
My tercel:: 1987 SR5 Wagon
Location: Nova Scotia, Canada

Re: A little progress report!

Post by Kozuto_98 »

Erikwi wrote: Sun Jun 28, 2020 6:19 pm lexus steering wheel?
your canadian cars always are so rough!
hope it works out. i painted my roof today.
Haha yeah, gotta work with what you can find sometimes.
Luckily my friend Ashley gave me her factory wheel from her AE86 when she swapped it out so there's something a bit better for the car.
20200613_080725.jpg
What color did you do for your roof?
You do not have the required permissions to view the files attached to this post.
1987 Tercel Wagon SR5 4WD
1998 Honda Accord Coupe V6 J35 swap
1997 Acura CL (Sold for 4A-GE money)
RIP 2016 Civic (wrist pin recall)
Erikwi
Top Notch Member
Posts: 114
Joined: Fri Mar 13, 2020 3:31 pm
My tercel:: 1988 stock auto
Location: lacrosse WI

Re: A little progress report!

Post by Erikwi »

i simply am painting my car the silver it came from the factory. not that i like it, just easier
Post Reply