Head gasket question
- Smatters09
- Member
- Posts: 36
- Joined: Tue Dec 03, 2019 11:39 am
- My tercel:: 1983 toyota tercel wagon 4wd 5speed
Head gasket question
So I'm swapping the head in my 83 tercel wagon I just bought because the original one is way warped had it checked at the machine shop no saving it shes like 14 thousands out of shape friend Luke is gonna hook me up with one but he mentioned there's a mod to the gasket to help keep the head cooler I was curious to what that mod is while I wait for the head to get here figured it can't hurt thanks
You do not have the required permissions to view the files attached to this post.
Re: Head gasket question
Smatters,
From the Repair Guides section, here is a good explanation. I didn't complete the marble/sanding process, but used the rest. Near 20K on the rebuild and all is well.
viewtopic.php?f=7&t=6059
Chris
From the Repair Guides section, here is a good explanation. I didn't complete the marble/sanding process, but used the rest. Near 20K on the rebuild and all is well.
viewtopic.php?f=7&t=6059
Chris
Psalm 37:4 "Delight yourself in the Lord and he will give you the desires of your heart"
In remembrance of my friend ARCHINSTL:
T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
In remembrance of my friend ARCHINSTL:
T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
- Petros
- Highest Ranking Member
- Posts: 11933
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: Head gasket question
here you go, it is in this thread, read the whole thread:
viewtopic.php?f=7&t=6059
I would also advise you to have the exhaust valves replaced with new ones, as well as the stem steals, both are cheap and worth doing. you need to resurface the top of the block so it is smooth, it is done by hand, procedure is shown in the thread above.
viewtopic.php?f=7&t=6059
I would also advise you to have the exhaust valves replaced with new ones, as well as the stem steals, both are cheap and worth doing. you need to resurface the top of the block so it is smooth, it is done by hand, procedure is shown in the thread above.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
- Smatters09
- Member
- Posts: 36
- Joined: Tue Dec 03, 2019 11:39 am
- My tercel:: 1983 toyota tercel wagon 4wd 5speed
Re: Head gasket question
None of the pictures show which would be helpful to I'm not sure where to put this extra port in the gasket
- Petros
- Highest Ranking Member
- Posts: 11933
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: Head gasket question
i need to fix that, you can thank photobucket change in policy. lets see if I can find the picture:
You do not have the required permissions to view the files attached to this post.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
- Smatters09
- Member
- Posts: 36
- Joined: Tue Dec 03, 2019 11:39 am
- My tercel:: 1983 toyota tercel wagon 4wd 5speed
Re: Head gasket question
Sweet thanks