Alternatives to OEM Ventilation Hose

General discussion about our beloved Tercel 4WD cars
Post Reply
battmrown
Newbie
Posts: 18
Joined: Thu Dec 06, 2018 6:45 pm
My tercel:: '84 SR5. Lifted.

Alternatives to OEM Ventilation Hose

Post by battmrown »

I'm looking to replace the PCV ventilation hoses coming out of the top of the valve cover. Parts numbers 1226115020 and 1226215030. They're both NLA and I was looking for some advice as to what would be an acceptable substitute or what other folks have done to replace them. Thanks!
Conquistador of the useless.
User avatar
garyfish
Highest Ranking Member
Posts: 889
Joined: Sat Nov 19, 2005 4:22 pm
My tercel:: 1985 Tercel SR5, stock; 1987 T4WD DLX wagon, manual tranny
Location: North Coastal California

Re: Alternatives to OEM Ventilation Hose

Post by garyfish »

I've used a right-angle PCV valve and a short length of good-quality stock ventilation hose.

I don't have any part numbers or hose sizes to share, but hopefully you get my drift.
1985 Tercel SR5 4WD wagon, 300K
1987 Tercel DLX 4WD wagon, 6-speed manual, 274K -- got this one running Jan. 2015 (had been sitting for 2 years); this has been my daily driver since 2016
User avatar
Petros
Highest Ranking Member
Posts: 11930
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: Alternatives to OEM Ventilation Hose

Post by Petros »

all auto parts stores have generic PVC valves that will fit, they are cheap too.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
Post Reply