Installing trailer hitch
- irowiki
- Highest Ranking Member
- Posts: 3463
- Joined: Tue Apr 02, 2013 10:02 am
- Location: Farmington, NM
Re: Installing trailer hitch
Yeah, anything not on the brakes, turn signals or reverse lights would be wired to the tail light wire. Hopefully the fuse is big enough? I wonder if you'd need a relay.
Former Tercel Enthusiast (not a practical family car anymore but they still have a place in my heart)
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 170k
97 4runner, 275k
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 170k
97 4runner, 275k
- Mark
- Highest Ranking Member
- Posts: 884
- Joined: Mon Apr 22, 2013 9:49 pm
- My tercel:: 1984 Automatic, 1981 sedan
- Location: Victoria, B.C.
Re: Installing trailer hitch
I've been looking at every trailer I've seen drive by today and I looked at a couple of new ones in a dealership and not one of them had front lights or a licence plate light as apparently required by law. None of the trailer lighting kits I've seen have them either. I'm starting to think I've been had by the internet.
- Mark
- Highest Ranking Member
- Posts: 884
- Joined: Mon Apr 22, 2013 9:49 pm
- My tercel:: 1984 Automatic, 1981 sedan
- Location: Victoria, B.C.
Re: Installing trailer hitch
I bought a few more lights and reflectors anyway. My trailer will be the most lit-up, legal trailer in town. At least it would be if I didn't intend to just tow it during the day.
-
- Highest Ranking Member
- Posts: 515
- Joined: Thu Dec 08, 2011 6:33 pm
- My tercel:: 1985 4wd 1986fwd 1983 4wd
Re: Installing trailer hitch
the under side of the light has a clear cut out in it were you mount the licence plate
to it,
to it,
- Mark
- Highest Ranking Member
- Posts: 884
- Joined: Mon Apr 22, 2013 9:49 pm
- My tercel:: 1984 Automatic, 1981 sedan
- Location: Victoria, B.C.
Re: Installing trailer hitch
Now I feel dumb. One of my tail lights that came with the trailer has a clear/frosted area on it. I had no idea what it was and I mounted it pointing up. Thanks for the info.jimcrazy wrote:the under side of the light has a clear cut out in it were you mount the licence plate
to it,
-
- Top Notch Member
- Posts: 223
- Joined: Mon Aug 10, 2015 9:51 pm
- My tercel:: 1984 Toyota Tercel SR 5 custom aluminum rims 4 a motor custom rims Bluetooth stereo system
- Location: Plymouth CA
Re: Installing trailer hitch
If you look on most trailers there are orange or amber lights in the front all they are our marker lights to let you know that the trailer is there sometimes they can be used as blinkers
i will find a tercel in a music video
That's my new goal
That's my new goal
- Mark
- Highest Ranking Member
- Posts: 884
- Joined: Mon Apr 22, 2013 9:49 pm
- My tercel:: 1984 Automatic, 1981 sedan
- Location: Victoria, B.C.
Re: Installing trailer hitch
I installed the lights and licence plate (I still have to wire up the lights) and added some "bunks" (the boards for the boat pontoons to sit on). I still have to find some slippery carpet for the bunks and find some rollers to make it easier to slide the boat up.
You do not have the required permissions to view the files attached to this post.
- Mark
- Highest Ranking Member
- Posts: 884
- Joined: Mon Apr 22, 2013 9:49 pm
- My tercel:: 1984 Automatic, 1981 sedan
- Location: Victoria, B.C.
Re: Installing trailer hitch
The pretty-much finished trailer:
I'm taking the boat out tomorrow for a dive so I'll see how it goes.You do not have the required permissions to view the files attached to this post.
- irowiki
- Highest Ranking Member
- Posts: 3463
- Joined: Tue Apr 02, 2013 10:02 am
- Location: Farmington, NM
Re: Installing trailer hitch
*claps*
Former Tercel Enthusiast (not a practical family car anymore but they still have a place in my heart)
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 170k
97 4runner, 275k
Site administrator, if something is broken, PM me!
87 Corolla FX16, 105k
94 Jamboree RV (Ford E-350), 90k
95 Camry Wagon, 170k
97 4runner, 275k
- marlinh
- Highest Ranking Member
- Posts: 1584
- Joined: Sun Apr 08, 2012 9:15 am
- My tercel:: 'Everett' Blue 87 4WD Wagon (Rocky 86, recently retired)
- Location: Kootenays
Re: Installing trailer hitch
Awesome. Great job on the trailer!
- Mark
- Highest Ranking Member
- Posts: 884
- Joined: Mon Apr 22, 2013 9:49 pm
- My tercel:: 1984 Automatic, 1981 sedan
- Location: Victoria, B.C.
Re: Installing trailer hitch
I took the boat out on the water today. The trailer is definitely not as easy to use as just shoving the boat up on the roof rack, but my idea was to save the wear and tear on the wagon. I've discovered that backing the trailer up in a straight line is almost impossible. The trailer wheels are too close to the car. When it came time to load the boat back up on to the trailer I ended up disconnecting the trailer from the car, walking the trailer down the boat ramp near the boat and then backed the car down and hooked the trailer back up. It also bounced more than I expected while driving. I'm pretty sure the trailer got air at times. I kept looking in my rear view mirror to see if the outboard had broken off yet.
You do not have the required permissions to view the files attached to this post.
- ARCHINSTL
- Goldie Forever
- Posts: 6369
- Joined: Sat Apr 30, 2005 1:52 pm
- My tercel:: Goldie is a 1986 SR5 attualmente con Weber/also owned the first T4WD in STL in late '82
- Location: Kirkwood, a 'burb of St. Louis
Re: Installing trailer hitch
I have no suggestions about the "bouncing" problem (trailer too light, even with load?), but I would venture that the difficulty with backing up in a straight line would disappear with practice.
Back in the Army in the early/mid/late '60s, my M38 Jeep (and later M38A1) was occasionally hitched to a A105 small trailer. The Jeeps, so course, had a small wheelbase and the trailer was "close behind" the vehicle. It took me a while, but I eventually got proficient with it (as long as it did not have the high canvas top installed!).
Props on your revival of the trailer!
Tom M.
Back in the Army in the early/mid/late '60s, my M38 Jeep (and later M38A1) was occasionally hitched to a A105 small trailer. The Jeeps, so course, had a small wheelbase and the trailer was "close behind" the vehicle. It took me a while, but I eventually got proficient with it (as long as it did not have the high canvas top installed!).
Props on your revival of the trailer!
Tom M.
T4WD augury?
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
"Oh, do not ask, 'What is it?' Let us go and make our visit."
T.S. Eliot - "The Love Song of J. Alfred Prufrock"
"Now and then we had a hope that, if we lived and were good, God would permit us to be pirates."
Mark Twain
-
- Top Notch Member
- Posts: 354
- Joined: Sat Jun 21, 2008 9:20 pm
- My tercel:: Currently without
- Location: Ontario
Re: Installing trailer hitch
Mark - Most small trailers have "1000lbs" springs and will bounce like crazy with a light load, not much you can do other than add weight to the trailer.
Installing a set of shocks would certainly help somewhat, at least with the oscillations that occur post bump.
Odd about the lights, never seen fed reg's before, I have only ever looked at provincial regs, generally speaking (Ont at least) all that extra stuff is only for trailers over 80in wide/30ft long.
Finished product looks great
Installing a set of shocks would certainly help somewhat, at least with the oscillations that occur post bump.
Odd about the lights, never seen fed reg's before, I have only ever looked at provincial regs, generally speaking (Ont at least) all that extra stuff is only for trailers over 80in wide/30ft long.
Finished product looks great
- Paultercel
- Member
- Posts: 47
- Joined: Thu May 29, 2014 10:37 am
- My tercel:: 1986 wagon looking to do some upgrades!
Re: Installing trailer hitch
Where would anyone recommend getting the tongue for a trailer hitch?!
- Petros
- Highest Ranking Member
- Posts: 11933
- Joined: Sun Jan 28, 2007 6:31 pm
- My tercel:: '84 Tercel4wd w/extensive mods
- Location: Arlington WA USA
Re: Installing trailer hitch
you might run the trailer tires on the soft side, not too low, but low enough where they will provide some damping and not so much bounce.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)