Part Number For Aisan Carburetor Accelerator Pump Arm Washer

This is a forum JUST for posting part numbers.
Post Reply
rivera100
Newbie
Posts: 7
Joined: Sun May 31, 2020 12:45 pm

Part Number For Aisan Carburetor Accelerator Pump Arm Washer

Post by rivera100 »

Hi there,

I rebuilt my Aisan carburetor but there's a washer that broke off. I can't find a part number for a replacement. I've attached a screenshot which shows the washer, spring and clip. This was taken from Robert Walker's (forum member, xirdneh) Aisan carburetor teardown video at around 57:40 minutes into the video. https://www.youtube.com/watch?v=kCzFuPqssfE

The exploded view, also attached, shows the washer circled in red but there is no part number for it. Does anyone happen to know the part number or have a spare?

Thanks,
-Rick
You do not have the required permissions to view the files attached to this post.
User avatar
Petros
Highest Ranking Member
Posts: 11930
Joined: Sun Jan 28, 2007 6:31 pm
My tercel:: '84 Tercel4wd w/extensive mods
Location: Arlington WA USA

Re: Part Number For Aisan Carburetor Accelerator Pump Arm Washer

Post by Petros »

it is likely a standard part, like a screw, will not have a part number but will go by size. any washer about the same size should work. as I recall it just holds the top of the spring on the shaft. I think I lost mine too, and just found another thin washer about the same size, been using it for 10 years.
'87 Tercel 4wd SR5 (current engine swap project)
'84 Tercel 4wd (daily driver, with on going mods)
'92 Mazda MPV 4wd (wife's daily driver)
'85 Tercel 4wd DLX auto(daughter's daily driver)
'01 Honda Civic (other daughter's daily driver)
Post Reply