Engine main wire/oil pressure wire connector

This is a forum JUST for posting part numbers.
Post Reply
Shanemt
Newbie
Posts: 19
Joined: Mon Jul 22, 2019 9:00 pm
My tercel:: 1983 sr5 4wd wagon

Engine main wire/oil pressure wire connector

Post by Shanemt »

Looking for an engine main wire/ oil pressure wire connector and possibly oil pressure s/w too. Parts E and 41 in the diagram picture. Any help would be appreciated!
You do not have the required permissions to view the files attached to this post.
User avatar
BaileySims
Highest Ranking Member
Posts: 626
Joined: Sat Aug 30, 2014 6:52 pm
My tercel:: 1983 Tercel SR5 4WD
Location: Texas
Contact:

Re: Engine main wire/oil pressure wire connector

Post by BaileySims »

You may be able to fish out the rubber isolator on top of that connector and solder a new wire to the remaining strands. I've had to make a repair once like that, might have been on the same plug even.
WAGON MAFIA.
Blood, sweat and beers.
Shanemt
Newbie
Posts: 19
Joined: Mon Jul 22, 2019 9:00 pm
My tercel:: 1983 sr5 4wd wagon

Re: Engine main wire/oil pressure wire connector

Post by Shanemt »

BaileySims wrote: Fri Aug 16, 2019 8:17 pm You may be able to fish out the rubber isolator on top of that connector and solder a new wire to the remaining strands. I've had to make a repair once like that, might have been on the same plug even.
Thanks for the advice I was able to get it connector all taken apart without damaging it, and think I’ll be able to fix this one now!
You do not have the required permissions to view the files attached to this post.
Post Reply